2024 John Deere 2730 Base

Information

2024 John Deere 2730

Combination Ripper

Adjust depth in six seconds on the go

In-cab control of each functional area

1/10th-in. (2.5-mm) accuracy

Expanded tractor compatibility

Features may include:

Internal basket scrapers
  • The internal basket scraper allows for a uniform field finish in wet conditions because the baskets do not need to be raised out of ground to avoid plugging and can stay in the ground 100 percent of the time.
  • The basket scraper is standard on 2730 Combination Rippers ordered with knife-edge baskets.
Variety of working and transport widths available to meet producer needs
  • 7S24 – seven-standard rigid frame with 610-mm (24-in.) spacing
  • 9S24 – nine-standard rigid frame with 610-mm (24-in.) spacing
  • 9S24 – nine-standard folding frame with 610-mm (24-in.) spacing
Multifunctional implement for single-pass primary tillage
  • The disk blades eliminate the need for multiple residue sizing passes into one single pass that reduces surface residue levels by 60 to 80 percent. The 2730’s ability to mix and bury more residue leads to faster soil warming in the spring all while reducing negative impacts of disease and insect pressure.
  • The ripper shanks accomplish full hardpan fracture across the entire soil profile with their 610-mm (24-in.) spacing to create a porous air and water environment for root development. Along with the ripper shank’s side-to-side spacing, it also features a 1270-mm (50-in.) fore-aft spacing that improves residue disbursement and contributes to the machines nearly plug-proof performance.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • 2730 Base
  • Available
  • Shear bolt protected above: 13 in (33 cm)

Specifications

  • 2024
  • John Deere
  • 2730
  • Base
  • Ripper
  • 34-55 hp (25.1-41 kW)
  • Tandem walk-over wheels
  • 5-7 mph (8-11.3 km/h)
  • Cushion-trip standard: 4,100 lb (1,859.7 kg)
  • 4 SCVs / 5 SCVs
  • 2,500 psi (17,237 kPa)
  • Design: Single tube
  • Spacing: 24 in. (61 cm) | Transport clearance: 13 in. (33 cm) | Underframe clearance Maximum: 37.5 in. (95.25 cm) | Wingless, LaserRip™ II points: 5 in. (12.7 cm) / 7 in. (17.8 cm) / 10 in. (25.4 cm) | On parabolic standards: 4 in. (10.2 cm) / 6 in. (15.2 cm) / 8 in. (20.3 cm) | Solid spherical low-concavity disk blades: 26x0.25 in. (660x6 mm) | blade spacing Individual: 18 in. (45.7 cm) / Effective: 9 in. (22.9 cm) / Disk gang: 11 in. (27.9 cm) / Effective: 5.5 in. (14 cm) | Front frame angle: Fixed: 18 degree (angle) / rear: Fixed: 18 degree (angle) | Individual dual mount: 18 in. (45.7 cm)
  • 14 ft (4.3 m) / 18 ft (5.5 m) / 22 ft (6.7 m) / 26 ft (7.9 m)
  • Individual blades: 19.9 ft (6.1 m) / 22.5 ft (6.9 m) / 18.8 ft (5.7 m) / 18.3 ft (5.6 m) | Disk gangs: 18.8 ft (5.7 m) / 22.5 ft (6.9 m) / 19.1 ft (5.8 m) / 18.7 ft (5.7 m)
  • Operating: 16 in. (40.6 cm) / 8 in. (20.3 cm)
  • Shear bolt protected above: 13 in (33 cm)
  • Depth control: Single-point crank / TruSet™ tillage | Type of standard: C-spring | Bearings: Sealed, maintenance-free
  • Fore-aft adjustment: Hitch turnbuckle