2024 John Deere Q800E Series Q810E

Information

2024 John Deere Q800E Series Q810E

QuikTrak™ Stand-On Mower

19-hp (14.2-kW)

36" deck, 7-gauge fabricated deck

Mow up to 13 km/h

Warranty: 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation

Features may include:

  • Commercial-quality engine is reliable and provides excellent performance and life
  • Fabricated mower deck is made from 7-gauge, 0.179-in. (4.6-mm) steel for reliability and performance
  • Large operator platform and quality leaning pad enhance operator comfort
  • Controls are easy to locate and use for operator comfort and productivity
  • Exclusive three-year, bumper-to-bumper warranty is standard with a QuikTrak™ Mower

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • Q800E Series Q810E
  • Tuff Torq TZT13 IHT
  • Available
  • With chute down: 49.5 in (126 cm)
  • 46 in (117 cm) | of cut range: Increments 0.25 in - 1.5-5 in (0.64 cm - 3.8-12.7 cm)

Specifications

  • 2024
  • John Deere
  • Q800E Series
  • Q810E
  • Stand-On
  • Model: FX600V
  • Gross at 3,600 rpm: 19 hp (14.2 kW)
  • 36.8 cu in. (603 cc) | Hydraulic pump: 0.61 cu in (10 cc) | Wheel motors: 12 cu in (196 cc)
  • Electro-magnetic with brake 169 Nm (125 lb-ft) (48 in.) | Electro-magnetic with brake 271 Nm (200 lb-ft) (54 in., 60in)
  • Two, V-twin
  • Forced air, with integrated clean out ports and oil cooler
  • Heavy-duty canister type with safety element
  • Gasoline
  • Tuff Torq TZT13 IHT
  • Dual hand-controlled levers
  • Internal wet disk | Hand lever
  • 18x8.5-10 pneumatic| Caster: 11x4-5
  • Charge system: At 3,600 rpm 20A | Battery voltage: 12 V | Cold cranking amp: 300 CCA
  • Blade tip speed Approximately: 18,000 fpm (5486 m/min) | Speed range: 0-8mph (0-12.9 km/h) | Forward Infinite: 0-8 mph (0-12.9 km/h) | Reverse Infinite: 0-3.5 mph (0-5.6 km/h)
  • Full flow, replaceable
  • Full pressure
  • Mower deck size: 36-in (91-cm) fabricated | hydraulic air cooler: 22 cm (Two 8.5 in.) fans | Blade thickness: 0.25 in (0.64 cm)
  • 36-in. (91-cm)
  • With chute down: 49.5 in (126 cm)
  • 62 in (157.5 cm)
  • 46 in (117 cm) | of cut range: Increments 0.25 in - 1.5-5 in (0.64 cm - 3.8-12.7 cm)
  • 7 gauge: 0.180 in (4.6 mm)
  • 5.6 U.S. gal (21.2 L)
  • 5 U.S qt (4.7 L)
  • Speed and direction control Twin hand-controlled levers
  • 720 lb (327 kg)
  • 36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation