2024 John Deere X300 Select Series X370

Information

2024 John Deere X300 Select Series X370

  • 21.5-hp (16.0-kW) iTorque™ Power System
  • Power two-wheel steer
  • 4 year/300 hour bumper-to-bumper warranty

Features may include:

Engine is smooth-running and reliable V-twin air-cooled design

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

  • 21.5 hp (16.0 kW)
  • Large 44.3 cu in. (726-cc) displacement
  • V-twin air-cooled design that provides smooth, quiet power

Quality features include:

  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner

V-twin design:

  • Excellent power and performance
  • Easy starts
  • Smooth operation
FLYWHEEL ALTERNATOR

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 12-amp charging capacity
  • Regulated to keep the battery at full charge without risk of overcharging
FUEL TANK HAS LARGE, 3.3-U.S. GAL. (12.5-L) CAPACITY

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

  • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
  • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
  • Located on the left fender
  • Helps eliminate spillage
  • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.
42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

  • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck suspended from the vehicle for a smooth and level cut
  • Adjustable mower wheels, positioned just above ground level, help reduce scalping
  • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
  • Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
  • For use on X330, X350, X354, and X370 Tractors
EXCELLENT CUT QUALITY

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
  • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere
  • X300 Select Series X370
  • Model: FR651V
  • mounting: Yes, heavy duty
  • Gasoline | Fuel tank location: Rear
  • Available
  • with mower: 50.5 in. (1283 mm) | with mower (deflector raised for storage): 51.2 in. (1300 mm) | without mower: 38 in. (964 mm)
  • Mower cut: 1-4 in. (13 positions, 2.5-10.2 cm) | increments: 0.25 in. (0.64 cm) | 49 in. (1244 mm)

Specifications

  • 2024
  • John Deere
  • X300 Select Series
  • X370
  • Riding
  • Model: FR651V
  • 21.5 hp (16.0 kW)
  • 44.3 cu in. (726 cc)
  • Overhead valve, full-pressure lube, oil filter
  • V-twin, cast-iron liners
  • Mechanical
  • method: Air
  • Dry, replaceable
  • Bendix
  • delivery: Pulse pump, carburetor
  • Gasoline | Fuel tank location: Rear
  • Gauge on dash
  • speed control: Separate levers, automatic choke return
  • Power, hydraulic
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Single belt
  • Internal wet disc
  • 20x10-8
  • 15x6-6
  • Mower: Two
  • 12 V / 340 CCA
  • Flywheel alternator, regulated, 12 amp
  • Forward: 0-5.8 mph (0-9.3 km/h ) | Reverse: 0-3.5 mph (0-5.6 km/h)
  • mounting: Yes, heavy duty
  • Welded heavy-duty
  • Headlights: Two standard, incandescent, 27 W
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening On left fender: 3 in. (7.6 cm) | Steering wheel - Large: 14 in. (35.6 cm) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 6.6 in. (17 cm) | Mower deck material: 0.105 in. (12 gauge 2.7 mm) | Mower wheels rotate: 90 degrees for easy mower removal
  • Accel Deep™ mower deck: 42 in. (107 cm)
  • 22 in. (55.9 cm) | Uncut circle: 30 in. (76 cm)
  • back: 18 in. (46 cm)
  • Mower cut: 1-4 in. (13 positions, 2.5-10.2 cm) | increments: 0.25 in. (0.64 cm) | 49 in. (1244 mm)
  • 71.5 in. (1817 mm)
  • 49.4 in. (1255 mm)
  • with mower: 50.5 in. (1283 mm) | with mower (deflector raised for storage): 51.2 in. (1300 mm) | without mower: 38 in. (964 mm)
  • tank: 3.3 U.S. gal. (12.5 L)
  • Maximum: 600 lb (272 kg)
  • 570 lb (259 kg)
  • Transaxle type: K57 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, under seat and covered toolbox | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Two pins and spring clips
  • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, replaceable
  • Hydraulic
  • Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Stamped steel deck shell
  • Fender: Stamped steel
  • Cut-and-sewn high-back | suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Mower wheel adjustment: Four-position, tool required | Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • 4 year/300 hour bumper-to-bumper