2020 John Deere 310E Base

2020 John Deere 310E

Features may include:

• Inter-axle Differential Lock (IDL) transmits 50 percent of available torque to the forward axle and 50 percent to the two rear axles, simplifying operation. Or it can be engaged on-the-fly while slipping, for smoother navigation of tough jobsites.

• Purpose-built transmission includes eight forward and four reverse gears to speed cycles and expand working range across a wide range of jobsite conditions.

• A Deere exclusive, all daily checks and periodic service are accessible from ground level, including refilling both fuel and diesel exhaust fluid (DEF).

• Front and rear worklights

• Remote park-brake release allows the park brake to be disengaged without climbing under the machine.

• When enabled through the monitor, the operator can limit the percentage the rear chassis is off-level when unloading.

• Standard reverse camera with choice of display gives the operator visibility to obstacles in the direct path of the machine while backing up.

• Industry-leading transmission retarder confidently slows the truck. Outboard wet-disc brakes in all three axles are at the ready when service brakes are needed.

• Greaseless pins and bushings are used throughout except in the articulation joint and oscillation area, so only eight grease fittings, need weekly attention.

• Integrated tire-pressure/temperature-monitoring system comes standards. If pressure drops by 10 percent, a passive alarm appears on the monitor.

• Ash-service intervals for the diesel particulate filter (DPF) are condition based, meaning the machine will notify the operator before service is required.