2018 John Deere 872G/GP Base
- Year 2018
- Make John Deere
- Model 872G/GP
- Engine PowerTech PSS 9.0L
2018 John Deere 872G/GP
Features may include:
Six-Wheel-Drive Configuration- Putting its entire weight and all six tires to work, their job-proven dual-path hydrostatic drive boosts productivity in all kinds of work
- Ash-service intervals for the diesel particulate filter (DPF) are condition based and may not be necessary until the first engine overhaul. Machine application, regular maintenance practices, and type of lubrication oil impact intervals
- Exclusive cooling package eliminates stacked coolers. Pivoting coolers together with the hinged swing-out fan, access to the cores is quick and cleaning is easy
- Standard hydraulically driven cool-on-demand reversing fan slows when the engine is idling to reduce fuel consumption and bystander noise levels. Reversing fan automatically cycles at operator-selected intervals to eject debris from the radiator and cooler cores
- Large service doors open wide, and same-side daily checkpoints are conveniently grouped for easy ground-level access
- Exclusive ball-and-socket draft-frame pivot and seven-position saddle provide best-in-class blade setup and improved ditch cutting, ditch cleaning, and reach outside the tires
- Long-term durability is bolstered by larger-than-usual articulation joint roller bearings
- Narrow center console and streamlined saddle bring the blade and front tires within focus
- On GP models control linkages are eliminated and large lower front windows further enhance visibility
- For unsurpassed productivity with a grade-control system, opt for a GP model. Eight armrest-mounted fingertip-actuated controls, including steering lever, are arranged in the industry-standard pattern on each side of the steering wheel. No extra levers required for grade control
- Automated cross-slope simplifies holding a consistent slope by reducing operation to a single lever
- At the touch of a button, return-to-straight automatically straightens an articulated frame. For quicker work cycles
- Automatic differential lock stays engaged when travelling straight, disengages in turns exceeding 10 degrees, and re-engages when returning to straight. Although fully automatic, this feature can be overridden by the operator via toggle switch
- Jackscrew-adjusted side-shift wear inserts keep the moldboard tight and precise. Takes only minutes to return tolerances to factory spec
- Two-hour replaceable super-tough draft frame and circle wear inserts minimize maintenance labor
- Choose from front scarifier, mid-mount scarifier, or rear scarifier/ripper
Engine
Engine Manufacturer
John Deere
Engine
PowerTech PSS 9.0L
Displacement
9 ltr (548 in)
Engine Power
224 kW (300 hp)
Engine Torque
Rise: 51 %
Brakes
Brake System Type
Service Brake Type: Multiple Wet Discs | Service Brake Actuation: Hydraulic
Drivetrain
Transmission
Manufacturer: John Deere
Wheels & Tires
Tires, Front Specification
size: 14.00 - 24
Tires, Rear Specification
size: 14.00 - 24
Electric
Electrical
System Voltage: 24 V
Operational
Operating Conditions
Number Of Speeds - Forward: 8 | Number Of Speeds - Reverse: 8
Operating Speed
Speed 8 - fwd: 45 kph (28 mph ) | Speed 8 - rev: 45 kph (28 mph )
Hydraulics
Hydraulic Flow
Pump: 218 lt/min (57.5 gal/min)
Maximum Pressure
Relief: 18961 kPa (2750 PSI)
Dimensions
Overall Length
8890 mm (29 ft 2 in)
Height
Over ROPS: 3180 mm (10 ft 5 in) | Moldboard: 686 mm (27 in)
Wheelbase
6160 mm (20 ft 3 in)
Dimensions
Bladebase: 2530 mm (8 ft 4 in) | Frame Circle Diameter: 1524 mm (60 in) | Moldboard Sideshift - Right: 683 mm (26.9 in) | Moldboard Sideshift - Left: 683 mm (26.9 in) | Shoulder Reach - Right: 2329 mm (7 ft 8 in) | Shoulder Reach - Left: 2329 mm (7 ft 8 in) | Circle Rotation: 360 | Bank Angle: 90 | Moldboard - Lift Above Ground: 452 mm (17.8 in) | Frame Articulation: 22
Width
Moldboard: 4270 mm (14 ft )
Moldboard Thickness
25 mm (1 in)
Blade Shape
Hydraulic Blade Tip - Forward: 42 | Hydraulic Blade Tip - Rearward: 5
Turning Radius
min: 7.21 m (23 ft 8 in)
Capacities
Fuel Capacity
416.5 ltr (110 gal)
Hydraulic Capacity
tank: 60.5 ltr (16 gal)
Axle Capacity, Front
Loading: 5094 kg (11230 lbs)
Axle Capacity, Rear
Loading / Tandem: 12891 kg (28420 lbs)
Weights
Weight
With Push Block & Ripper: 21187 kg (46710 lbs)