2024 John Deere Engine & Drivetrains Generator Drive Engines 4045HFG06

2024 John Deere Engine & Drivetrains Generator Drive Engines 4045HFG06

Swipe to View More

  • Year 2024
  • Make John Deere Engine & Drivetrains
  • Model Generator Drive Engines
  • Engine Model: 4045HFG06
2024 John Deere Engine & Drivetrains Generator Drive Engines 4045HFG06

2024 John Deere Engine & Drivetrains Generator Drive Engines 4045HFG06

2024 John Deere Engine & Drivetrains Generator Drive Engines 4045HFG06

4.5L Generator Drive Engine

Features may include:

DOC/SCR aftertreatment
  • These engines use diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) technology to meet Final Tier 4 emission regulations. They meet customer performance without the need for a diesel particulate filter (DPF).
Big engine durability
  • Heavy-duty components that are usually found in our larger engines are used throughout our generator drive engine line. Many of our DOC/SCR engines feature top-liner cooling, steel pistons, and variable-speed fan drives.
Series turbochargers
  • Fresh air is first drawn into the low-pressure turbocharger(fixed geometry) and compressed to a higher pressure. The compressed air is then drawn into the high-pressure turbocharger (VGT or WGT), where the air is further compressed. The high-pressure air is then routed through a charge air cooler and into the engine's intake manifold. By splitting the work between two turbochargers, both can operate at peak efficiency and at slower rotating speeds —lowering stress on turbocharger components and improving reliability. Series turbocharging delivers more boost pressure than single turbocharger configurations which results in higher power density, improved low-speed torque, and improved high altitude operation.
Cooled exhaust gas recirculation (EGR)
  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx.
High-pressure common-rail (HPCR) and engine control unit (ECU)
  • The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures up to 2,500 bar (36,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.

Engine

Emissions EPA Final Tier 4
Engine Model: 4045HFG06
Cylinder Liners 4
Displacement 275 cu in (4.5 L)
Bore 4.17 in (106 mm)
Stroke 5.00 in (127 mm)
Compression Ratio 17.2 : 1
Engine Type In-line, 4-cycle
Aspiration Turbocharged and air-to-air aftercooled
Engine Power Prime: 157 hp (117 kW) | Standby: 172 hp (128 kW) | Rated Fan: 10.3 hp (7.7 kW)

Electric

Electrical 60 Hz (1800 rpm)
Generator Output Calculated set - Prime: 120-126 kVA (96-101 kWe) | Calculated set - Standby: 132-138 kVA (106-111 kWe)

Operational

Operating Conditions Generator Efficiency: 88-92%

Dimensions

Length 34.3 in (870 mm) | DOC: 16.5 in (418 mm) | SCR Catalyst: 25.1 in (638 mm)
Width 25.0 in (635 mm)
Height 44.5 in (1130 mm)
Dimensions DOC Diameter: 9.7 in (246.6 mm) | SCR Catalyst Diameter: 12.5 in (318 mm)

Weights

Weight DOC: 43.9 lb (19.92 kg) | SCR Catalyst: 75.0 lb (34 kg)
Dry Weight 1257 lb (570 kg)

Features

Features Power Factor: 0.8

Product Photography