2024 John Deere Engine & Drivetrains Generator Drive Engines 4045TF285
- Year 2024
- Make John Deere Engine & Drivetrains
- Model Generator Drive Engines
- Engine Model: 4045TF285
2024 John Deere Engine & Drivetrains Generator Drive Engines ??4045TF285
4.5L Generator Drive Engine
Features may include:
2-valve cylinder head- Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head
- The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures, up to 1600 bar (23,000 PSI). It also controls fuel injection timing and provides precise control for the start, duration, and end of the injection
- Fixed geometry turbochargers are precisely matched to the power level and application
- In turbocharged engines, the air is pre-compressed. Due to the higher pressure, more air is supplied into the combustion chamber allowing a corresponding increase in fuel injection which results in greater engine output
- The new HPCR fuel system and engine control unit (ECU) allow for multiple fuel injections. The number of fuel injections, based on speed and load, help contribute to lower combustion temperatures, which reduce the formation of NOx and particulates. The multiple injection strategy also provides an added benefit of noise reduction
Engine
Emissions
EPA Tier 3
Engine
Model: 4045TF285
Cylinder Liners
4
Displacement
275 cu in (4.5 L)
Bore
4.17 in (106 mm)
Stroke
5.00 in (127 mm)
Compression Ratio
19.0:1
Engine Type
In-line, 4-cycle
Aspiration
Turbocharged
Rated Engine Speed
1800 rpm (60 Hz)
Engine Power
Prime: 90 hp (67 kW) | standby: 99 hp (74 kW) | Rated fan: 7 hp (5.2 kW)
Electric
Generator Output
Calculated set - prime: 68-71 kVA (54-57 kWe) | Calculated set - standby: 76-79 kVA (61-63 kWe)
Operational
Operating Conditions
Generator efficiency: 88-92%
Dimensions
Length
33.9 in (860 mm)
Width
24.1 in (612 mm)
Height
40.9 in (1039 mm)
Weights
Dry Weight
1083 lb (491 kg)
Features
Features
Power factor: 0.8