2024 John Deere Engine & Drivetrains Generator Drive Engines 4045TFG03
- Year 2024
- Make John Deere Engine & Drivetrains
- Model Generator Drive Engines
- Engine Model: 4045TFG03
2024 John Deere Engine & Drivetrains Generator Drive Engines 4045TFG03
4.5L Generator Drive Engine
Features may include:
Wastegated turbocharger- Wastegated turbochargers are designed to develop more airflow at lower engine speeds to improve low-speed torque. The wastegate control device bleeds off a portion of the exhaust flow at higher engine speeds. Wastegated turbos deliver improved transient response and higher peak torque without compromising engine envelope size. They also provide the lowest installed cost across a given power range.
- This system is the Best Available Control Technology (BACT) for particulates that delivers premium block load acceptance characteristics and utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.
- The HPCR fuel system provides variable common-rail pressure and higher injection pressures up to 2,500 bar (36,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.
- Lower installed cost
- Mounting points are the same as previous engine models
- Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head.
Engine
Emissions
EPA Final Tier 4
Engine
Model: 4045TFG03
Cylinder Liners
4
Displacement
275 cu in (4.5 L)
Bore
4.17 in (106 mm)
Stroke
5.00 in (127 mm)
Compression Ratio
19.0:1
Engine Type
In-line, 4-cycle
Aspiration
Turbocharged
Engine Power
Prime: 68 hp (50 kW) | Standby: 74 hp (55 kW) | Rated Fan: 3 hp (2.2 kW)
Electric
Electrical
60 Hz (1800 rpm)
Generator Output
Calculated set - Prime: 53-55 kVA (42-44 kWe) | Calculated set - Standby: 58-61 kVA (46-49 kWe)
Operational
Operating Conditions
Generator Efficiency: 88-92%
Dimensions
Length
34.3 in (870 mm) | DOC/DPF Size 2: 22.6 in (573 mm)
Width
28.3 in (720 mm)
Height
37.8 in (960 mm)
Dimensions
DOC/DPF Size 2 Diameter: 8.2 in (209 mm)
Weights
Dry Weight
1124 lb (510 kg)
Weight
DOC/DPF Size 2: 44.1 lb (20 kg)
Features
Features
Power Factor: 0.8