Flint Equipment

  • 1206 Blaylock St.
  • Albany, GA 31705
  • Call Us:
  • https://www.flintequipco.com/
Print This Page

2024 John Deere Engine & Drivetrains Generator Drive Engines 4045TFG03

Information

2024 John Deere Engine & Drivetrains Generator Drive Engines 4045TFG03

4.5L Generator Drive Engine

Features may include:

Wastegated turbocharger
  • Wastegated turbochargers are designed to develop more airflow at lower engine speeds to improve low-speed torque. The wastegate control device bleeds off a portion of the exhaust flow at higher engine speeds. Wastegated turbos deliver improved transient response and higher peak torque without compromising engine envelope size. They also provide the lowest installed cost across a given power range.
Exhaust filters
  • This system is the Best Available Control Technology (BACT) for particulates that delivers premium block load acceptance characteristics and utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream and catalysts within the exhaust filter trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.
High-pressure common-rail (HPCR) and engine control unit (ECU)
  • The HPCR fuel system provides variable common-rail pressure and higher injection pressures up to 2,500 bar (36,000 psi). It also controls fuel injection timing and provides precise control for the start, duration, and end of injection.
Compact size
  • Lower installed cost
  • Mounting points are the same as previous engine models
2-valve cylinder head
  • Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head.

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere Engine & Drivetrains
  • Generator Drive Engines 4045TFG03
  • Model: 4045TFG03
  • 1124 lb (510 kg)
  • Available
  • 28.3 in (720 mm)
  • 37.8 in (960 mm)

Specifications

  • 2024
  • John Deere Engine & Drivetrains
  • Generator Drive Engines
  • 4045TFG03
  • General
  • Model: 4045TFG03
  • EPA Final Tier 4
  • 4
  • 275 cu in (4.5 L)
  • 4.17 in (106 mm)
  • 5.00 in (127 mm)
  • 19.0:1
  • In-line, 4-cycle
  • Turbocharged
  • Prime: 68 hp (50 kW) | Standby: 74 hp (55 kW) | Rated Fan: 3 hp (2.2 kW)
  • 60 Hz (1800 rpm)
  • Calculated set - Prime: 53-55 kVA (42-44 kWe) | Calculated set - Standby: 58-61 kVA (46-49 kWe)
  • Generator Efficiency: 88-92%
  • DOC/DPF Size 2 Diameter: 8.2 in (209 mm)
  • 34.3 in (870 mm) | DOC/DPF Size 2: 22.6 in (573 mm)
  • 28.3 in (720 mm)
  • 37.8 in (960 mm)
  • 1124 lb (510 kg)
  • DOC/DPF Size 2: 44.1 lb (20 kg)
  • Power Factor: 0.8