Flint Equipment

  • 1206 Blaylock St.
  • Albany, GA 31705
  • Call Us:
  • https://www.flintequipco.com/
Print This Page

2024 John Deere Engine & Drivetrains Generator Drive Engines 6068HG550

Information

2024 John Deere Engine & Drivetrains Generator Drive Engines 6068HG550

6.8L Generator Drive Engine

Features may include:

Stage V.
  • John Deere has billions of hours of field experience with off-highway diesel engine technologies and launched many of its engines ahead of EPA and EU deadlines, and is ready to meet Stage V emissions regulations using our proven diesel particulate filter (DPF) solutions. In most cases, OEM customers currently using a John Deere engine with a diesel particulate filter (DPF) won’t have to re-engineer machine design to meet the requirements of Stage V regulations. Our engineers continue to employ a global network of technical resources and the latest technology to lower emissions while improving performance and fluid efficiency.
Variable geometry turbocharger (VGT)
  • Varies exhaust pressure based on load and speed to ensure proper EGR flow. The combination of the cooled EGR and VGT provide low-speed torque, quicker transient response, higher-peak torque, and world-class fuel economy.
Exhaust filters
  • This system is the Best Available Control Technology (BACT) for particulates that delivers premium block load acceptance characteristics, utilizing a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream, and catalysts within the exhaust filter, trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.
Cooled exhaust gas recirculation (EGR)
  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing NOx.
Selective catalytic reduction (SCR)
  • John Deere engines feature an SCR system that utilizes a urea-based additive, sometimes referred to as diesel exhaust fluid (DEF) to meet Stage V emission standards. A chemical reaction in the SCR catalyst converts urea and NOx emissions into nitrogen and water vapor.
  • Show More

Photos

Highlights

  • Albany, Georgia
  • 2024
  • John Deere Engine & Drivetrains
  • Generator Drive Engines 6068HG550
  • Model: 6068HG550
  • 1698 lb (770 kg)
  • Available
  • 28.3 in (720 mm)
  • 51.8 in (1315 mm)

Specifications

  • 2024
  • John Deere Engine & Drivetrains
  • Generator Drive Engines
  • 6068HG550
  • General
  • Model: 6068HG550
  • EPA Final Tier 4 / EU Stage V
  • 6
  • 415 cu in (6.8 L)
  • 4.2 in (106 mm)
  • 5.00 in (127 mm)
  • 17.2 : 1
  • In-line, 4-cycle
  • Turbocharged and air-to-air aftercooled
  • Prime: 220-201 hp (164-150 kW) | Standby: 241-221 hp (180-165 kW) | Rated Fan: 12.1-11.5 hp (9-8.3 kW)
  • 60 Hz (1800 rpm) / 50 Hz (1500 rpm)
  • Calculated set - Prime: 180-165 kVA (144-132 kWe) | Calculated set - Standby: 199-182 kVA (159-146 kWe)
  • Generator Efficiency: 93%
  • DOC/DPF: Size 5 | SCR Catalyst: Size 5
  • 44.9 in (1140 mm) | DOC: 22.6 in (572.9 mm) | SCR Catalyst: 30.9 in (784.9 mm)
  • 28.3 in (720 mm)
  • 51.8 in (1315 mm)
  • DOC: 51.8 lb (23.5 kg) | SCR Catalyst: 104.1 lb (47.2 kg)
  • 1698 lb (770 kg)
  • Power Factor: 0.8