2024 John Deere Engine & Drivetrains Industrial Diesel Engines 4045HI550

2024 John Deere Engine & Drivetrains Industrial Diesel Engines 4045HI550

Swipe to View More

  • Year 2024
  • Make John Deere Engine & Drivetrains
  • Model Industrial Diesel Engines
  • Engine Model: 4045HI550
2024 John Deere Engine & Drivetrains Industrial Diesel Engines 4045HI550

2024 John Deere Engine & Drivetrains Industrial Diesel Engines 4045HI550

2024 John Deere Engine & Drivetrains Industrial Diesel Engines 4045HI550

4.5L Industrial Diesel Engine

Features may include:

Stage V.
  • John Deere has billions of hours of field experience with off-highway diesel engine technologies and launched many of its engines ahead of EPA and EU deadlines, and is ready to meet Stage V emissions regulations using our proven diesel particulate filter (DPF) solutions. In most cases, OEM customers currently using a John Deere engine with a diesel particulate filter (DPF) won’t have to re-engineer machine design to meet the requirements of Stage V regulations. Our engineers continue to employ a global network of technical resources and the latest technology to lower emissions while improving performance and fluid efficiency.
Wastegated turbocharger
  • Wastegated turbochargers are designed to develop more airflow at lower engine speeds to improve low-speed torque. The wastegate control device bleeds off a portion of the exhaust flow at higher engine speeds. Wastegated turbos deliver improved transient response and higher peak torque without compromising engine envelope size. They also provide the lowest installed cost across a given power range.
Exhaust filters
  • These engines utilize a catalyzed exhaust filter that contains a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). The DOC reacts with exhaust gases to reduce carbon monoxide, hydrocarbons, and some particulate matter (PM). The downstream DPF traps and holds the remaining PM. Trapped particles are oxidized within the DPF through a continuous cleaning process called passive regeneration. Passive regeneration occurs during normal operating conditions when heat from the exhaust stream, and catalysts within the exhaust filter, trigger the oxidation of the trapped PM. If passive regeneration cannot be achieved due to low temperature, load, or speed, then PM is removed using active regeneration — an automatic cleaning process controlled by the exhaust temperature management system.
Cooled exhaust gas recirculation (EGR)Cooled exhaust gas recirculation (EGR)
  • EGR cools and mixes measured amounts of cooled exhaust gas with incoming fresh air to lower peak combustion temperatures, thereby reducing Nox.
Selective catalytic reduction (SCR)
  • John Deere engines feature an SCR system that utilizes a urea-based additive, sometimes referred to as diesel exhaust fluid (DEF) to meet Stage V emission standards. A chemical reaction in the SCR catalyst converts urea and NOx emissions into nitrogen and water vapor.

Engine

Emissions EPA Final Tier 4/EU Stage V
Engine Model: 4045HI550
Cylinder Liners 4
Displacement 275 cu in (4.5 L)
Bore 4.2 in (106 mm)
Stroke 5.0 in (127 mm)
Compression Ratio 17.0 : 1
Engine Type In-line, 4-cycle
Aspiration Turbocharged and air-to-air aftercooled
Engine Power Rated: 74-104 kW (99-139 hp) @ 2200-2400 rpm | Peak: 80-104 kW (107-139 hp) @ 2000-2400 rpm | Power bulge: up to 8%
Engine Torque Peak: 427-540 nM (315-398 lb-ft) @ 1600 rpm | Torque rise: Up to 35%

Dimensions

Length 34.1 in (867 mm)
Width 26.8 in (680 mm)
Height 41.5 in (1076 mm)
Dimensions DOC/DPF Size: 2 | SCR Catalyst: 3

Weights

Dry Weight 1191 lb (540 kg)

Features

Features Application Rating: Continuous

Product Photography