2020 Rhino Equipment Bulldozers RD24 Straight-tilt

Information

2020 Rhino Equipment Bulldozers RD24 Straight-tilt

Rhino® Dozers combine incredible versatility to handle a wide range of jobs with innovations that help you do those jobs better, faster and more efficiently. These crawler dozers are ideal for residential construction performing such tasks as clearing and grading lots, sloping the sides of roads, back-filling, and final grade work for landscaping and driveway construction.

The RD series has earned a reputation for best-in-class versatility, productivity and resale value. Because it excels across a wide range of jobs, customers choose the Rhino® Dozers for everything from dozing and ripping to scraper work and finish grading. The versatile Rhino® Dozer is a top choice for land clearing, highway and road construction, building oil/gas/wind farm pads and working landfills.

Features may include:

  • The RD series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior blade control for excellent material handling. RD Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Speed travel can also be varied to fit specific applications, terrain conditions, or operating preferences.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Bulldozers RD24 Straight-tilt
  • Cummins Model: NT855
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 Mpa (290 psi)
  • Available
  • Grouser: 560 mm (22.0 in) | Over Track: 2,895 mm (9.5 ft) | Blade: 3,823 mm (12.5 ft)
  • Top of Cab: 3,402 mm (11.2 ft) | Blade: 1,280 mm (4.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Bulldozers
  • RD24 Straight-tilt
  • Crawler
  • Cummins Model: NT855
  • Cummins | Rhino®
  • Tier 2
  • 6
  • 14 L (854 cu in)
  • Net Power 164 kW (220 Hp) @ 2,000 rpm
  • Net Peak Torque 950 Nm (701 lb-ft) @ 1,400 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 Mpa (290 psi)
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Voltage: 24 Volts
  • Rating: 50A
  • Maximum Travel Speeds 1st Gear Forward: 4 km/h (2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4 km/h (3 mph) | Maximum Travel Speeds 2nd Gear Forward: 7 km/h (4 mph) | Maximum Travel Speeds 2nd Gear Reverse 8 km/h (5 mph) | Maximum Travel Speeds 3rd Gear Forward: 10 km/h (6 mph) | Maximum Travel Speeds 3rd Gear Reverse : 13 km/h (8 mph)
  • 0.07 Mpa (10.2 psi)
  • Gear pump | Control: Lever control for blade with float mode; lever control for ripper
  • 14 mpa (2,031 psi)
  • Max. Flow: 262 L/min (69 gpm)
  • 2 Front lights, 2 Rear lights
  • Ground Contact Area: 35,504 cm2 (5,503 sq.in) | Blade Tilt: 400 mm (15.7 in)
  • Track: 1,880 mm (74.0 in)
  • Grouser: 560 mm (22.0 in) | Over Track: 2,895 mm (9.5 ft) | Blade: 3,823 mm (12.5 ft)
  • Track on Ground: 3,168 mm (124.7 in) | With Ripper: 7,604 mm (24.9 ft)
  • Top of Cab: 3,402 mm (11.2 ft) | Blade: 1,280 mm (4.2 ft)
  • Blade: 1,170 mm (46.1 in)
  • 6,332 mm (20.8 ft)
  • Tread Depth with Single-Bar Grouser: 60 mm (2.4 in) | Blade Digging: 670 mm (26.4 in)
  • Dirt: 404 mm (15.9 in)
  • Blade Angle: 55 degrees
  • Minimum: 3,100 mm (10.2 ft)
  • Pull Maximum: 270 kN (60,698 lb) | Pull At 2.0 km/h (1.2 mph): 170 kN (38,218 lb) | Pull At 6.0 km/h (3.7 mph): 50 kN (11,240 lb)
  • Tank: 450 L (119 gal)
  • 118 L (31 gal)
  • Engine: 20 L (5 gal)
  • 150 L (40 gal)
  • Tank: 100 L (26 gal)
  • Fan drive: Belt driven | Shoes, Each Side: 38 | Track Rollers, Each Side: 6 | Operator Station: ROPS and FOPS | Blade Type: Straight-tilt
  • Blade: 6.3 m3 (8.2 cu. Yd)
  • Base: 23,450 kg (51,698 lb) | with 3-Shank Ripper: 27,350 kg (60,296 lb)
  • Sealed and lubricated
  • 216 mm (8.5 in)