2020 Rhino Equipment Bulldozers RD36 Angle

Information

2020 Rhino Equipment Bulldozers RD36 Angle

Rhino® Dozers combine incredible versatility to handle a wide range of jobs with innovations that help you do those jobs better, faster and more efficiently. These crawler dozers are ideal for residential construction performing such tasks as clearing and grading lots, sloping the sides of roads, back-filling, and final grade work for landscaping and driveway construction.

The RD series has earned a reputation for best-in-class versatility, productivity and resale value. Because it excels across a wide range of jobs, customers choose the Rhino® Dozers for everything from dozing and ripping to scraper work and finish grading. The versatile Rhino® Dozer is a top choice for land clearing, highway and road construction, building oil/gas/wind farm pads and working landfills.

Features may include:

  • The RD series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior blade control for excellent material handling. RD Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Speed travel can also be varied to fit specific applications, terrain conditions, or operating preferences.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Bulldozers RD36 Angle
  • Cummins Model: NTA855
  • Powershift, Hydrostatic, planetary gear and multiple disc clutch | System Pressure: 2 Mpa (290 psi)
  • Available
  • Grouser: 560 mm (22.0 in) | Over Track: 2,810 mm (9.2 ft) | Blade: 4,850 mm (15.9 ft)
  • Top of Cab: 3,640 mm (11.9 ft) | Blade: 1,530 mm (5.0 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Bulldozers
  • RD36 Angle
  • Crawler
  • Cummins Model: NTA855
  • Cummins | Rhino®
  • Tier 2
  • 6
  • 14 L (854 cu in)
  • Net Power 257 kW (345 Hp) @ 2,000 rpm
  • Net Peak Torque 1,423 Nm (1,050 lb-ft) @ 1,400 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, Hydrostatic, planetary gear and multiple disc clutch | System Pressure: 2 Mpa (290 psi)
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Voltage: 24 Volts
  • Rating: 50A
  • Maximum Travel Speeds 1st Gear Forward: 4 km/h (2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4 km/h (3 mph) | Maximum Travel Speeds 2nd Gear Forward: 7 km/h (4 mph) | Maximum Travel Speeds 2nd Gear Reverse 8 km/h (5 mph) | Maximum Travel Speeds 3rd Gear Forward: 12 km/h (7 mph) | Maximum Travel Speeds 3rd Gear Reverse : 14 km/h (8 mph)
  • 0.11 Mpa (16.09 psi)
  • Gear pump | Control: Lever control for blade with float mode; lever control for ripper
  • 14 Mpa (2,031 psi)
  • Max. Flow: 355 L/min (94 gpm)
  • 2 Front lights, 2 Rear lights
  • Ground Contact Area: 35,392 cm2 (5,486 sq.in) | Blade Tilt: 1,000 mm (39.4 in) | Blade Angle: 25 degrees
  • Track: 2,140 mm (84.3 in)
  • Grouser: 560 mm (22.0 in) | Over Track: 2,810 mm (9.2 ft) | Blade: 4,850 mm (15.9 ft)
  • Track on Ground: 3,160 mm (124.4 in) | With Ripper: 8,560 mm (28.1 ft)
  • Top of Cab: 3,640 mm (11.9 ft) | Blade: 1,530 mm (5.0 ft)
  • Blade: 1,590 mm (62.6 in)
  • 6,880 mm (22.6 ft)
  • Tread Depth with Single-Bar Grouser: 80 mm (3.1 in) | Blade Digging: 560 mm (22.0 in)
  • Dirt: 404 mm (15.9 in)
  • Blade Angle: 55 degrees
  • Minimum: 3,100 mm (10.2 ft)
  • Maximum: 360 kN (80,931 lb) | At 2.0 km/h (1.2 mph): 170 kN (38,218 lb) | At 6.0 km/h (3.7 mph): 50 kN (11,240 lb)
  • Tank: 600 L (159 gal)
  • 121 L (32 gal)
  • Engine: 47 L (12 gal)
  • 185 L (49 gal)
  • Tank: 164 L (43 gal)
  • Fan drive: Belt driven or Hydraulic Reversible | Shoes, Each Side: 41 | Track Rollers, Each Side: 7 | Operator Station: ROPS and FOPS | Blade Type: Angle-tilt
  • Blade: 8.2 m3 (10.7 cu. Yd)
  • Base: 35,750 kg (78,815 lb) | With 3-Shank Ripper: 40,946 kg (90,270lb)
  • Sealed and lubricated
  • 229 mm (9.0 in)