2020 Rhino Equipment Bulldozers RD8 Straight-tilt

Information

2020 Rhino Equipment Bulldozers RD8 Straight-tilt

Rhino® Dozers combine incredible versatility to handle a wide range of jobs with innovations that help you do those jobs better, faster and more efficiently. These crawler dozers are ideal for residential construction performing such tasks as clearing and grading lots, sloping the sides of roads, back-filling, and final grade work for landscaping and driveway construction.

The RD series has earned a reputation for best-in-class versatility, productivity and resale value. Because it excels across a wide range of jobs, customers choose the Rhino® Dozers for everything from dozing and ripping to scraper work and finish grading. The versatile Rhino® Dozer is a top choice for land clearing, highway and road construction, building oil/gas/wind farm pads and working landfills.

Features may include:

  • The RD series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior blade control for excellent material handling. RD Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Speed travel can also be varied to fit specific applications, terrain conditions, or operating preferences.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Bulldozers RD8 Straight-tilt
  • Model: LR4A3Z-22
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 mpa (290 psi)
  • Available
  • Grouser: 400 mm (15.7 in) | Over Track: 1,900 mm (6.2 ft) | Blade: 2,480 mm (8.1 ft)
  • Top of Cab: 2,740 mm (9.0 ft) | Blade: 930 mm (3.1 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Bulldozers
  • RD8 Straight-tilt
  • Crawler
  • Model: LR4A3Z-22
  • Rhino®
  • Tier2
  • 4
  • 3.0 L (183 cu in)
  • Net Power 70 kW (94 Hp) @ 2,200 rpm
  • Net Peak Torque 398 Nm (294 lb-ft) @ 1,780 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, planetary gear and multiple disc clutch | System Pressure: 2 mpa (290 psi)
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Voltage: 24 Volts
  • 50A
  • Maximum Travel Speeds 1st Gear Forward: 2.4 km/h (1.5 mph) | Maximum Travel Speeds 1st Gear Reverse: 4.9 km/h (3.0 mph) | Maximum Travel Speeds 2nd Gear Forward: 5 km/h (3.1 mph) | Maximum Travel Speeds 2nd Gear Reverse 8.9 km/h (5.5 mph) | Maximum Travel Speeds 3rd Gear Forward: 7.6 km/h (4.7 mph) | Maximum Travel Speeds 4th Gear Forward: 10.4 km/h (6.5 mph)
  • 53 Mpa (7,687 psi)
  • Gradeability: 20 degrees
  • Gear pump | Control: Lever control for blade with float mode; lever control for ripper
  • 15 mpa (2,176 psi)
  • Max. Flow: 54 L/min (14 gpm)
  • Lights: 2 Front lights, 2 Rear lights
  • Ground Contact Area: 17,040 cm2 (2,641 sq.in) | Blade Cutting-Edge Angle: 20 degrees | Blade Tilt: 345 mm (13.6 in)
  • Track: 1,500 mm (59.1 in)
  • Grouser: 400 mm (15.7 in) | Over Track: 1,900 mm (6.2 ft) | Blade: 2,480 mm (8.1 ft)
  • Track on Ground: 2,130 mm (83.9 in) | With Ripper: 5,270 mm (17.3 ft)
  • Top of Exhaust: 2,600 mm (8.5 ft)
  • Top of Cab: 2,740 mm (9.0 ft) | Blade: 930 mm (3.1 ft)
  • 737 mm (29.0 in)
  • 4,200 mm (13.8 ft)
  • Tread Depth with Single-Bar Grouser: 50 mm (2.0 in) | Blade Digging: 370 mm (14.6 in)
  • Dirt: 350 mm (13.8 in)
  • Pull Maximum: 69 kN (15,512 lb) | Pull At 2.0 km/h (1.2 mph): 40 kN (8,992 lb) | Pull At 6.0 km/h (3.7 mph): 24 kN (5,395 lb)
  • Tank: 215 L (57 gal)
  • 22.5 L (6 gal)
  • Engine: 15 L (4 gal)
  • 57 L (15 gal)
  • Tank: 40 L (11 gal)
  • Fan drive: Belt driven | Shoes, Each Side: 39 | Track Rollers, Each Side: 5 | Operator Station: ROPS and FOPS | Blade Type: Straight-tilt
  • Blade: 2.0 m3 (2.6 cu. Yd)
  • Base: 8,600 kg (18,960 lb) | With 3-Shank Ripper: 9,200 kg (20,283 lb)
  • Undercarriage: Sealed and lubricated
  • 140 mm (5.5 in)