2020 Rhino Equipment Cold Planers RCP1300W

Information

2020 Rhino Equipment Cold Planers RCP1300W

Rhino® Cold Planers put the tons in the trucks hour after hour, shift after shift. Production is not just about horsepower. It’s how the cold planer delivers the power to the rotor.

Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.

Rhino® cold planers has a head which can be used much like a drill to break up material so that it can be removed. The angle and depth can be adjusted to allow the cold planer to cut down to precisely the desired depth.

Features may include:

  • Our cold planers offer solid design features, systems that are simple to troubleshoot, and low cost of operation, made for commercial applications and narrow milling projects. Unique cutter housing design gives efficient material evacuation at any cut depth and width. Versatile and productive.
  • Independent elevating control of left and right wheels for quick adjustment of milling depth and curb milling. Easy access doors provide convinient access for the operator to change tools for asphalt or concrete milling.
  • Full hydraulic travel and braking systems provide immediate response for effectiveness and safety. The hydrostatic closed loop system gives excellent power to weight ratios.
  • Diesel Engine provides excellent power, reliability, and efficiency in adverse working conditions. Conveniently placed filters allow for easy maintenance.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Cold Planers RCP1300W
  • Model: SC8D190G2B1
  • Available
  • 450 mm (18 in) | Base Machine: 2,430 mm (8.0 ft) | Conveyor: 1,000 mm (3.3 ft)
  • Max. Feeding: 3,500 mm (11 ft) | Max. Canopy Raised: 3,100 mm (10.2 ft) | Min. No Canopy: 2,650 mm (8.7 ft) | Base Machine: 3,100 mm (10.2 ft) | Conveyor: 780 mm (2.6 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Cold Planers
  • RCP1300W
  • General
  • Model: SC8D190G2B1
  • Rhino®
  • Net Power 140 kW (188 Hp) @ 2,200 rpm
  • 8.3 L (506 cu. In)
  • Tier 2
  • Full-flow spin-on filter
  • Turbocharged
  • Under-hood, dual element dry type
  • Direct Injection
  • Hydraulically activated by operator, Heavy-Duty clutches
  • Hydrostatic closed-loop system provides dynamic braking
  • Manually activated, Drum mounted on transmission output shaft
  • Tire Diameter Front: 660 mm (26 in) | Front Wheel to Front of Machine: 850 mm (2.8 ft)
  • 24 Volts
  • 70 Amp, 120 Ah
  • Milling: 15 m/min (591 in/min) | Speed @2,200 rpm: 116 rpm
  • Max. Travel: 13.0 kmh (8 mph)
  • Gear Pump, Constant displacement
  • System: 35 Mpa (5,076 psi )
  • Tool Spacing (tip): 15 mm (0.6 in) | Swing: 30 degrees (15 degrees each side) | Max. Truck Clearance: 3,500 mm (11.5 ft)
  • 1,300 mm (51 in)
  • Cutting: 120 mm (4.7 in)
  • 720 mm (28 in)
  • 450 mm (18 in) | Base Machine: 2,430 mm (8.0 ft) | Conveyor: 1,000 mm (3.3 ft)
  • Max. Feeding: 3,500 mm (11 ft) | Max. Canopy Raised: 3,100 mm (10.2 ft) | Min. No Canopy: 2,650 mm (8.7 ft) | Base Machine: 3,100 mm (10.2 ft) | Conveyor: 780 mm (2.6 ft)
  • Conveyor Up: 10,642 mm (34.9 ft)
  • Without Conveyor: 3,815 mm (12.5 ft) | Base Machine: 5,100 mm (16.7 ft) | Conveyor: 7,535 mm (24.7 ft)
  • 2,325 mm (7.6 ft)
  • 2,480 mm (8.1 ft)
  • Theoretical Capacity: 84.1 m3/h (110 yd3/h)
  • Tank: 240 L (63 gal)
  • 20 L (5 gal)
  • Engine: 18 L (5 gal)
  • Tank: 350 L (92 gal)
  • Tank: 300 L (79 gal)
  • Fan Drive: Belt driven | Number of tools: 110 | Water Spray System: Pressurized water spray system ensures dust control and belt lubrication, Flat pattern spray provides better cleaning performance
  • Hydraulically driven for maximum productivity