2020 Rhino Equipment Excavators REX130

Information

2020 Rhino Equipment Excavators REX130

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX130
  • Cummins Model: 4BT3
  • Available
  • Upperstructure: 2,490 mm (8.2 ft) | Gauge: 1,960 mm (6.4 ft)
  • Max. Cutting: 8,630 mm (28.3 ft) | Max. Dumping: 6,180 mm (20.3 ft) | Cab: 2,813 mm (9.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX130
  • Medium
  • Cummins Model: 4BT3
  • Cummins or Rhino®
  • Rating: Tier 2
  • 4
  • 3.9 L (238 cu. In)
  • Net Power 86 kw (115 hp)@ 2,200 rpm
  • Fuel System: Direct Injection
  • Turbocharged, air-to-air charge air cooler
  • Boom (2): 105 mm (4.1 in) | Arm (1): 115 mm (4.5 in) | Bucket (1): 95 mm (3.7 in)
  • Boom (2): 990 mm (39.0 in) | Arm (1): 1,175 mm (46.3 in) | Bucket (1): 885 mm (34.8 in)
  • 27,220 Nm (20,076 lb-ft)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 12.6 rpm
  • Triple Semi-Grouser (500mm) (20 in) Shoes: 38 Kpa (5.5 psi)
  • Arm Digging Force: 64 kN (14,388 lb) | Bucket Digging Force: 80 kN (17,985 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • Pressure: 24.5 Mpa (3,553 psi) | Power Boost Mpa (psi): 25(3,553)
  • Max. Flow L/min (gpm) (each): 46(12)
  • Max. Reach: 8,390 mm (27.5 ft) | Max. Reach at Ground Level: 8,180 mm (26.8 ft) | Max. Vertical Wall: 4,940 mm (16.2 ft) | Tail Swing Radius: 2,015 mm (6.6 ft) | Swing Radius: 2,015 mm (6.6 ft) | Rod Diameter Boom (2): 65 mm (2.6 in) | Rod Diameter Arm (1): 60 mm (2.4 in) | Rod Diameter Bucket (1): 55 mm (2.2 in)
  • 500 mm (19.7 ft)
  • Arm: 2,500 mm (8.2 ft) | Track on Ground: 2,750 mm (9.0 ft) | Undercarriage: 3,486 mm (11.4 ft)
  • Max. Digging Depth: 5,500 mm (18.0 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 5,305 mm (17.4 ft)
  • Max. Cutting: 8,630 mm (28.3 ft) | Max. Dumping: 6,180 mm (20.3 ft) | Cab: 2,813 mm (9.2 ft)
  • Overall Length with 3,050 mm (10 ft) Arm: 7,600 mm (24.9 ft)
  • Overall Height with 3,050 mm (10ft) Arm: 2,780 mm (9.1 ft)
  • Counterweight Clearance: 870 mm (2.9 ft)
  • Upperstructure: 2,490 mm (8.2 ft) | Gauge: 1,960 mm (6.4 ft)
  • Triple Semi-Grouser 500 mm (20 in) Shoes: 2,460 mm (8.1 ft)
  • Pull: 8,000 kg (17,637 lb)
  • Fuel Tank: 247 L (65 gal)
  • 14 L (4 gal)
  • Engine: 11 L (3 gal)
  • System: 145 L (38 gal) | Tank: 90 L (24 gal)
  • Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 7 | Shoes (each side) Triple Semi-Grousers: 42
  • Base: 13,000 kg (28,660 lb) | Triple Semi Grouser 700mm (28 in) Shoes: 5,094 kg (11,230 lb) | One-Piece Boom: 1,088 kg (2,399 lb) | 3,050 mm (10 ft): 525 kg (1,157 lb) Boom Lift Cylinders (2), Total: 186 kg (410 lb) 1.0 m3 (1.3 cu. Yd) Bucket: 370 kg (816 lb) Counterweight, Standard: 2,450(5,401) | Lift Over End at 15' Radius, Ground Level: 5,420 kg (11,949 lb) | Lift Over End at 20' Radius, Ground Level: 3,710 kg (8,179 lb) | Lift Over Side at 15' Radius, Ground Level: : 3,710 kg (8,179 lb) | Lift Over Side at 20' Radius, Ground Level: 2,490 kg (5,490 lb)
  • With full fuel tank; 79 kg (175lb) operator; 0.3 m3 (0.4 cu. Yd), general purpose bucket; 500 mm (20 in) shoes; and 1,650 mm (5.4 ft) arm
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated