2020 Rhino Equipment Excavators REX35

Information

2020 Rhino Equipment Excavators REX35

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • The standard rubber track lets you work on multiple surfaces such as grass, pavement or stone without damaging the surface or machine.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX35
  • Available
  • Upperstructure: 1,640 mm (5.4 ft) | Undercarriage: 1,750 mm (5.7 ft)
  • Max. Cutting: 5,030 mm (16.5 ft) | Max. Dumping: 3,410 mm (11.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX35
  • Compact
  • Rhino®
  • Rating: Tier 3
  • 4
  • 2.2 L (134 cu. In)
  • Net Power 25 kw (34 hp)@ 2,200 rpm
  • Fuel System: Direct Injection
  • Naturally Aspirated
  • Boom (2): 75 mm (3.0 in) | Arm (1): 75 mm (3.0 in) | Bucket (1): 70 mm (2.8 in)
  • Boom (2): 550 mm (21.7 in) | Arm (1): 605 mm (23.8 in) | Bucket (1): 510 mm (20.1 in)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 2.7 kph (1.7 mph) | Maximum Travel Speeds High: 4.0 kph (2.5 mph) | Swing Mechanism: 12 rpm
  • Rubber Track (350mm 13.8 in): 36 Kpa (5.2 psi)
  • Arm Digging Force: 19 kN (4,159 lb) | Bucket Digging Force: 23.7 kN (5,328 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • Pressure: 24.5 Mpa (3,553 psi) | Power Boost Mpa (psi): 25(3,553)
  • Max. Flow L/min (gpm) (each): 46(12)
  • Max. Reach: 5,530 mm (18.1 ft) | Max. Reach at Ground Level: 5,420 mm (17.8 ft) | Min. Swing Radius: 2,185 mm (7.2 ft) | Swing Radius: 1,600 mm (5.2 ft) | Rod Diameter Boom (2): 40 mm (1.6 in) | Rod Diameter Arm (1): 45 mm (1.8 in) | Rod Diameter Bucket (1): 40 mm (1.6 in)
  • 350 mm (13.8 ft)
  • Arm: 1,450 mm (4.8 ft) | Track on Ground: 1,710 mm (5.6 ft) | Undercarriage: 2,190 mm (7.2 ft)
  • Max. Digging Depth: 3,076 mm (10.1 ft)
  • Max. Cutting: 5,030 mm (16.5 ft) | Max. Dumping: 3,410 mm (11.2 ft)
  • 5,500 mm (18.0 ft) | Transport: 3,353 mm (11.0 ft)
  • 1,861 mm (6.1 ft) | Top of Cab: 2,455 mm (8.1 ft)
  • Min. 350 mm (13.8 in) | Counterweight Clearance: 585 mm (1.9 ft)
  • Upperstructure: 1,640 mm (5.4 ft) | Undercarriage: 1,750 mm (5.7 ft)
  • Fuel Tank: 82 L (22 gal)
  • 5 L (1 gal)
  • Engine: 7.4 L (2 gal)
  • Tank: 90 L (24 gal)
  • Base: 4,200 kg (9,259 lb)
  • With full fuel tank; 79 kg (175lb) operator; 0.17 m3 (0.22 cu. Yd) general purpose bucket; 350 mm (13.8 in) tracks; and 1,450 mm (4.8 ft) arm
  • Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 1 | Track Rollers (each side): 4 | Shoes (each side) Triple Semi-Grousers: 350(13.8)
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated