Current Rhino Equipment Equipment Excavators

2020 Rhino Equipment Excavators REX360

2020 Rhino Equipment Excavators REX360

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Excavators
  • Engine Cummins Model: 6CTAA8
Shop Rhino Equipment Pre-Owned
Product Details Specifications Photos
2020 Rhino Equipment Excavators REX360

2020 Rhino Equipment Excavators REX360

  • Year 2020
  • Manufacturer Rhino Equipment
  • Model Name Excavators
  • Trim Name REX360
  • Generic Type (Primary) Medium
  • Engine Manufacturer Cummins or Rhino®
  • Engine Cummins Model: 6CTAA8
  • Emissions Rating: Tier 2
  • Cylinder Liners 6
  • Displacement 8.3 L (506 cu. In)
  • Engine Power Net Power 192 kw (257 hp)@ 1,950 rpm
  • Ignition Fuel System: Direct Injection
  • Aspiration Turbocharged, air-to-air charge air cooler
  • Bore Boom (2): 140 mm (5.5 in) | Arm (1): 160 mm (6.3 in) | Bucket (1): 150 mm (5.9 in)
  • Stroke Boom (2): 1,420 mm (55.9 in) | Arm (1): 1,825 mm (71.9 in) | Bucket (1): 1,200 mm (47.2 in)
  • Engine Torque 112,590 Nm (83,042 lb-ft)

2020 Rhino Equipment Excavators REX360

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Engine

Engine Manufacturer Cummins or Rhino®
Engine Cummins Model: 6CTAA8
Emissions Rating: Tier 2
Cylinder Liners 6
Displacement 8.3 L (506 cu. In)
Engine Power Net Power 192 kw (257 hp)@ 1,950 rpm
Ignition Fuel System: Direct Injection
Aspiration Turbocharged, air-to-air charge air cooler
Bore Boom (2): 140 mm (5.5 in) | Arm (1): 160 mm (6.3 in) | Bucket (1): 150 mm (5.9 in)
Stroke Boom (2): 1,420 mm (55.9 in) | Arm (1): 1,825 mm (71.9 in) | Bucket (1): 1,200 mm (47.2 in)
Engine Torque 112,590 Nm (83,042 lb-ft)

Drivetrain

Drive System Power Train: Dual speed mode for tracks on-dash one-button activation

Operational

Operating Speed Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 10.6 rpm
Ground Pressure Triple Semi-Grouser (600mm) (23.6 in) Shoes: 68 Kpa (9.8 psi)
Operating Conditions Arm Digging Force: 184 kN (41,365 lb) | Bucket Digging Force: 208 kN (46,760 lb)

Hydraulics

Hydraulic Type System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure 34 Mpa (4,975 psi) | Power Boost Mpa (psi): 35(5,076)
Hydraulic Flow Max. Flow L/min (gpm) (each): 265 (70)

Dimensions

Track Width 600 mm (23.6 ft)
Dimensions Max. Reach: 11,100 mm (36.4 ft) | Max. Reach at Ground Level: 10,910 mm (35.8 ft) | Max. Vertical Wall: 6,380 mm (20.9 ft) | Min. Swing Radius: 4,265 mm (14.0 ft) | Tail Swing Radius: 3,420 mm (11.2 ft) | Swing Radius: 3,420 mm (11.2 ft) | Rod Diameter Boom (2): 100 mm (3.9 in) | Rod Diameter Arm (1): 115 mm (4.5 in) | Rod Diameter Bucket (1): 95 mm (3.7 in)
Length Arm: 3,185 mm (10.4 ft) | Track on Ground: 3,700 mm (12.1 ft) | Undercarriage: 4,600 mm (15.1 ft)
Depth, Maximum Max. Digging Depth: 7,370 mm (24.2 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 7,020 mm (23.0 ft)
Height Max. Cutting: 10,200 mm (33.5 ft) | Max. Dumping: 7,135 mm (23.4 ft) | Cab: 3,278 mm (10.8 ft)
Overall Length Overall Length with 3,050 mm (10 ft) Arm: 11,080 mm (36.4 ft)
Overall Height Overall Height with 3,050 mm (10ft) Arm: 3,180 mm (10.4 ft)
Ground Clearance Counterweight Clearance: 2,265 mm (7.4 ft)
Width Upperstructure: 2,995 mm (9.8 ft) | Gauge: 2,590 mm (8.5 ft)
Overall Width Triple Semi-Grouser 600 mm (24 in) Shoes: 3,190 mm (10.5 ft)

Capacities

Fuel Capacity Fuel Tank: 610 L (161 gal)
Cooling System 45 L (12 gal)
Oil capacity Engine: 32.5 L (9 gal)
Hydraulic Capacity Tank: 310 L (82 gal)
Features Swing Mechanism: 16.7 L (4.4 gal) | Final Drive Case (each): 8.3 L (2.2 gal)

Weights

Weight Base: 34,500 kg (76,059 lb) | Lift Over End at 25' Radius, Ground Level: 11,130 kg (24,537 lb) | Lift Over End at 20' Radius, Ground Level: 14,855 kg (32,750 lb) | Lift Over Side at 25' Radius, Ground Level: : 7,587 kg (16,726 lb) | Lift Over Side at 20' Radius, Ground Level: 9,564 kg (21,085 lb)
Weight, In Running Order With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm

Features

Features Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 8 | Shoes (each side) Triple Semi-Grousers: 48
Track Type Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated

Product Photography