2020 Rhino Equipment Excavators REX360

Information

2020 Rhino Equipment Excavators REX360

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX360
  • Cummins Model: 6CTAA8
  • Available
  • Upperstructure: 2,995 mm (9.8 ft) | Gauge: 2,590 mm (8.5 ft)
  • Max. Cutting: 10,200 mm (33.5 ft) | Max. Dumping: 7,135 mm (23.4 ft) | Cab: 3,278 mm (10.8 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX360
  • Medium
  • Cummins Model: 6CTAA8
  • Cummins or Rhino®
  • Rating: Tier 2
  • 6
  • 8.3 L (506 cu. In)
  • Net Power 192 kw (257 hp)@ 1,950 rpm
  • Fuel System: Direct Injection
  • Turbocharged, air-to-air charge air cooler
  • Boom (2): 140 mm (5.5 in) | Arm (1): 160 mm (6.3 in) | Bucket (1): 150 mm (5.9 in)
  • Boom (2): 1,420 mm (55.9 in) | Arm (1): 1,825 mm (71.9 in) | Bucket (1): 1,200 mm (47.2 in)
  • 112,590 Nm (83,042 lb-ft)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 10.6 rpm
  • Triple Semi-Grouser (600mm) (23.6 in) Shoes: 68 Kpa (9.8 psi)
  • Arm Digging Force: 184 kN (41,365 lb) | Bucket Digging Force: 208 kN (46,760 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • 34 Mpa (4,975 psi) | Power Boost Mpa (psi): 35(5,076)
  • Max. Flow L/min (gpm) (each): 265 (70)
  • Max. Reach: 11,100 mm (36.4 ft) | Max. Reach at Ground Level: 10,910 mm (35.8 ft) | Max. Vertical Wall: 6,380 mm (20.9 ft) | Min. Swing Radius: 4,265 mm (14.0 ft) | Tail Swing Radius: 3,420 mm (11.2 ft) | Swing Radius: 3,420 mm (11.2 ft) | Rod Diameter Boom (2): 100 mm (3.9 in) | Rod Diameter Arm (1): 115 mm (4.5 in) | Rod Diameter Bucket (1): 95 mm (3.7 in)
  • 600 mm (23.6 ft)
  • Arm: 3,185 mm (10.4 ft) | Track on Ground: 3,700 mm (12.1 ft) | Undercarriage: 4,600 mm (15.1 ft)
  • Max. Digging Depth: 7,370 mm (24.2 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 7,020 mm (23.0 ft)
  • Max. Cutting: 10,200 mm (33.5 ft) | Max. Dumping: 7,135 mm (23.4 ft) | Cab: 3,278 mm (10.8 ft)
  • Overall Length with 3,050 mm (10 ft) Arm: 11,080 mm (36.4 ft)
  • Overall Height with 3,050 mm (10ft) Arm: 3,180 mm (10.4 ft)
  • Counterweight Clearance: 2,265 mm (7.4 ft)
  • Upperstructure: 2,995 mm (9.8 ft) | Gauge: 2,590 mm (8.5 ft)
  • Triple Semi-Grouser 600 mm (24 in) Shoes: 3,190 mm (10.5 ft)
  • Fuel Tank: 610 L (161 gal)
  • 45 L (12 gal)
  • Engine: 32.5 L (9 gal)
  • Tank: 310 L (82 gal)
  • Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 8 | Shoes (each side) Triple Semi-Grousers: 48
  • Base: 34,500 kg (76,059 lb) | Lift Over End at 25' Radius, Ground Level: 11,130 kg (24,537 lb) | Lift Over End at 20' Radius, Ground Level: 14,855 kg (32,750 lb) | Lift Over Side at 25' Radius, Ground Level: : 7,587 kg (16,726 lb) | Lift Over Side at 20' Radius, Ground Level: 9,564 kg (21,085 lb)
  • With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated