2020 Rhino Equipment Excavators REX450

Information

2020 Rhino Equipment Excavators REX450

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX450
  • Cummins Model: QSM11
  • Available
  • Upperstructure: 3,045 mm (10.0 ft) | Gauge: 2,890 mm (9.5 ft)
  • Max. Cutting: 10,910 mm (33.5 ft) | Max. Dumping: 7,550 mm (24.8 ft) | Cab: 3,280 mm (10.8 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX450
  • Medium
  • Cummins Model: QSM11
  • Cummins or Rhino®
  • Rating: Tier3
  • 6
  • 11 L (671 cu. In)
  • Net Power 251 kw (337 hp)@ 2,200 rpm
  • Fuel System: Direct Injection
  • Turbocharged, air cooler
  • Boom (2): 150 mm (5.9 in) | Arm (1): 185 mm (7.3 in) | Bucket (1): 160 mm (6.3 in)
  • Boom (2): 1,590 mm (62.6 in) | Arm (1): 1,800 mm (70.9 in) | Bucket (1): 1,270 mm (50.0 in)
  • 152,600 Nm (112,552 lb-ft)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5.5 kph (3.4 mph) | Swing Mechanism: 9.0 rpm
  • Triple Semi-Grouser (700mm) (28 in) Shoes: 72 Kpa (10.4 psi)
  • Arm Digging Force: 20,100 kN (45.187 lb) | Bucket Digging Force: 25,000 kN (56,202 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • 34 Mpa (4,975 psi) | Power Boost Mpa (psi): 35(5,076)
  • Max. Flow L/min (gpm) (each): 360 (95)
  • Max. Reach: 12,025 mm (39.5 ft) | Max. Reach at Ground Level: 11,815 mm (38.8 ft) | Max. Vertical Wall: 6,800 mm (22.3 ft) | Tail Swing Radius: 3,645 mm (12.0 ft) | Swing Radius: 3,645 mm (12.0 ft) | Rod Diameter Boom (2): 115 mm (4.5 in) | Rod Diameter Arm (1): 130 mm (5.1 in) | Rod Diameter Bucket (1): 120 mm (4.7 in)
  • 700 mm (27.6 ft)
  • Arm: 3,380 mm (11.1 ft) | Track on Ground: 4,020 mm (13.2 ft) | Undercarriage: 4,360 mm (14.3 ft)
  • Max. Digging Depth: 7,810 mm (35.8 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 7,500 mm (24.6 ft)
  • Max. Cutting: 10,910 mm (33.5 ft) | Max. Dumping: 7,550 mm (24.8 ft) | Cab: 3,280 mm (10.8 ft)
  • Overall Length with 3,050 mm (10 ft) Arm: 11,980 mm (39.3 ft)
  • Overall Height with 3,050 mm (10ft) Arm: 3,640 mm (11.9 ft)
  • Counterweight Clearance: 2,355 mm (7.7 ft)
  • Upperstructure: 3,045 mm (10.0 ft) | Gauge: 2,890 mm (9.5 ft)
  • Triple Semi-Grouser 600 mm (24 in) Shoes: 3,490 mm (11.5 ft)
  • Fuel Tank: 650 L (172 gal)
  • 36.8 L (10 gal)
  • Engine: 38 L (10 gal)
  • Tank: 335 L (88 gal)
  • Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 8 | Shoes (each side) Triple Semi-Grousers: 48
  • Base: 45,800 kg (100,972 lb) | Lift Over End at 25' Radius, Ground Level: 14,820 kg (32,673 lb) | Lift Over End at 20' Radius, Ground Level: 19,165 kg (42,252 lb) | Lift Over Side at 25' Radius, Ground Level: : 14,820 kg (32,673 lb) | Lift Over Side at 20' Radius, Ground Level: 12,860 kg (28,351 lb)
  • With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated