2020 Rhino Equipment Excavators REX70

Information

2020 Rhino Equipment Excavators REX70

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX70
  • Model: 4BT3.3
  • Available
  • Upperstructure: 2,198 mm (7.2 ft) | Gauge: 1,700 mm (5.6 ft)
  • Max. Cutting: 7,165 mm (23.5 ft) | Max. Dumping: 5,068 mm (16.6 ft) | Cab: 2,630 mm (8.6 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX70
  • Compact
  • Model: 4BT3.3
  • Cummins
  • Rating: Tier 3
  • 4
  • 3.3 L (201 cu. In)
  • Net Power 45 kw (60 hp)@ 2,200 rpm
  • Fuel System: Direct Injection
  • Naturally Aspirated
  • Boom (2): 115 mm (4.5 in) | Arm (1): 95 mm (3.7 in) | Bucket (1): 85 mm (3.3 in)
  • Boom (2): 885 mm (34.8 in) | Arm (1): 900 mm (35.4 in) | Bucket (1): 730 mm (28.7 in)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 3 kph (2 mph) | Maximum Travel Speeds High: 5 kph (3 mph) | Swing Mechanism: 10 rpm
  • Triple Semi-Grouser (500mm) (20 in) Shoes: 30 Kpa (4.4 psi)
  • Arm Digging Force: 33 kN (7,419 lb) | Bucket Digging Force: 53 kN (11,847 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • Pressure: 24.5 Mpa (3,553 psi) | Power Boost Mpa (psi): 25(3,553)
  • Max. Flow L/min (gpm) (each): 46(12)
  • Max. Reach: 6,330 mm (20.8 ft) | Max. Reach at Ground Level: 6,180 mm (20.3 ft) | Max. Vertical Wall: 3,505 mm (11.5 ft) | Tail Swing Radius: 1,755 mm (5.8 ft) | Swing Radius: 1,755 mm (5.8 ft) | Rod Diameter Boom (2): 65 mm (2.6 in) | Rod Diameter Arm (1): 60 mm (2.4 in) | Rod Diameter Bucket (1): 55 mm (2.2 in)
  • 350 mm (13.8 ft)
  • Arm: 1,650 mm (5.4 ft) | Track on Ground: 2,130 mm (7.0 ft) | Undercarriage: 2,757 mm (9.0 ft)
  • Max. Digging Depth: 4,038 mm (13.2 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 3,950 mm (13.0 ft)
  • Max. Cutting: 7,165 mm (23.5 ft) | Max. Dumping: 5,068 mm (16.6 ft) | Cab: 2,630 mm (8.6 ft)
  • Overall Length with 3,050 mm (10 ft) Arm: 6,100 mm (20.0 ft)
  • Overall Height with 3,050 mm (10ft) Arm: 2,515 mm (8.3 ft)
  • Counterweight Clearance: 760 mm (2.5 ft)
  • Upperstructure: 2,198 mm (7.2 ft) | Gauge: 1,700 mm (5.6 ft)
  • Triple Semi-Grouser 500 mm (20 in) Shoes: 2,198 mm (7.2 ft)
  • Fuel Tank: 66 L (17 gal)
  • 8 L (2 gal)
  • Engine: 11.7 L (3 gal)
  • Tank: 60 L (16 gal)
  • Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 1 | Track Rollers (each side): 5 | Shoes (each side) Triple Semi-Grousers: 40
  • Base: 6,800 kg (14,991 lb) | Lift Over End at 15' Radius, Ground Level: 3,170 kg (6,989 lb) | Lift Over Side at 15' Radius, Ground Level: 1,925 kg (4,244 lb)
  • With full fuel tank; 79 kg (175lb) operator; 0.3 m3 (0.4 cu. Yd), general purpose bucket; 500 mm (20 in) shoes; and 1,650 mm (5.4 ft) arm
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated