Current Rhino Equipment Equipment Excavators

2020 Rhino Equipment Excavators REX700

2020 Rhino Equipment Excavators REX700

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Excavators
  • Engine Cummins Model: QSX15
Shop Rhino Equipment Pre-Owned
Product Details Specifications Photos
2020 Rhino Equipment Excavators REX700

2020 Rhino Equipment Excavators REX700

  • Year 2020
  • Manufacturer Rhino Equipment
  • Model Name Excavators
  • Trim Name REX700
  • Generic Type (Primary) Medium
  • Engine Manufacturer Cummins or Rhino®
  • Engine Cummins Model: QSX15
  • Emissions Rating: Tier 4
  • Cylinder Liners 6
  • Displacement 11 L (671 cu. In)
  • Engine Power Net Power 264 kw (354 hp)@ 1,950 rpm
  • Ignition Fuel System: Direct Injection
  • Aspiration Turbocharged, air-to-air charge air cooler
  • Bore Boom (2): 190 mm (7.5 in) | Arm (1): 210 mm (8.3 in) | Bucket (1): 190 mm (7.5 in)
  • Stroke Boom (2): 1,790 mm (70.5 in) | Arm (1): 2,110 mm (83.1 in) | Bucket (1): 1,440 mm (56.7 in)
  • Engine Torque 216,560 Nm (159,726 lb-ft)

2020 Rhino Equipment Excavators REX700

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Engine

Engine Manufacturer Cummins or Rhino®
Engine Cummins Model: QSX15
Emissions Rating: Tier 4
Cylinder Liners 6
Displacement 11 L (671 cu. In)
Engine Power Net Power 264 kw (354 hp)@ 1,950 rpm
Ignition Fuel System: Direct Injection
Aspiration Turbocharged, air-to-air charge air cooler
Bore Boom (2): 190 mm (7.5 in) | Arm (1): 210 mm (8.3 in) | Bucket (1): 190 mm (7.5 in)
Stroke Boom (2): 1,790 mm (70.5 in) | Arm (1): 2,110 mm (83.1 in) | Bucket (1): 1,440 mm (56.7 in)
Engine Torque 216,560 Nm (159,726 lb-ft)

Drivetrain

Drive System Power Train: Dual speed mode for tracks on-dash one-button activation

Operational

Operating Speed Maximum Travel Speeds Low: 2 kph (1 mph) | Maximum Travel Speeds High: 4 kph (2 mph) | Swing Mechanism: 8.6 rpm
Ground Pressure Triple Semi-Grouser (700mm) (28 in) Shoes: 89 Kpa (12.9 psi)
Operating Conditions Arm Digging Force: 262 kN (58,900 lb) | Bucket Digging Force: 328 kN (73,737 lb)

Hydraulics

Hydraulic Type System: Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure 35 Mpa (5,076 psi) | Power Boost Mpa (psi): 36(5,221)
Hydraulic Flow Max. Flow L/min (gpm) (each): 430(114)

Dimensions

Track Width 700 mm (27.6 ft)
Dimensions Max. Reach: 11,740 mm (38.5 ft) | Max. Reach at Ground Level: 11,440 mm (37.5 ft) | Max. Vertical Wall: 4,000 mm (13.1 ft) | Tail Swing Radius: 5,555 mm (18.2 ft) | Swing Radius: 3,530 mm (11.6 ft) | Rod Diameter Boom (2): 130 mm (5.1 in) | Rod Diameter Arm (1): 140 mm (5.5 in) | Rod Diameter Bucket (1): 130 mm (5.1 in)
Length Arm: 3,020 mm (9.9 ft) | Track on Ground: 4,720 mm (15.5 ft) | Undercarriage: 5,990 mm (19.7 ft)
Depth, Maximum Max. Digging Depth: 7,185 mm (23.6 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 6,800 mm (22.3 ft)
Height Max. Cutting: 11,140 mm (36.5 ft) | Max. Dumping: 7,050 mm (23.1 ft) | Cab: 3,538 mm (11.6 ft)
Overall Length Overall Length with 3,020 mm (9.9 ft) Arm: 12,170 mm (39.9 ft)
Overall Height Overall Height with 3,020 mm (9.9 ft) Arm: 4,780 mm (15.7 ft)
Ground Clearance Counterweight Clearance: 2,500 mm (8.2 ft)
Width Upperstructure: 4,015 mm (13.2 ft) | Gauge: 3,350 mm (11.0 ft)
Overall Width Triple Semi-Grouser 700 mm (28 in) Shoes: 4,000 mm (13.1 ft)

Capacities

Fuel Capacity Fuel Tank: 900 L (238 gal)
Cooling System 75 L (20 gal)
Oil capacity Engine: 50 L (13 gal)
Hydraulic Capacity Tank: 400 L (106 gal)
Features Swing Mechanism: 15 L (4.0 gal) | Final Drive Case (each): 16 L (4.2 gal)

Weights

Weight Base: 70,000 kg (154,324 lb) | Lift Over End at 20' Radius, Ground Level: 26,980 kg (59,481 lb) | Lift Over End at 25' Radius, Ground Level: 21,200 kg (46,738 lb) | Lift Over Side at 20' Radius, Ground Level: 22,980 kg (50,662 lb) | Lift Over Side at 25' Radius, Ground Level: : 16,300 kg (50,662 lb)
Weight, In Running Order With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm

Features

Features Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 9 | Shoes (each side) Triple Semi-Grousers: 51
Track Type Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated

Product Photography