2020 Rhino Equipment Pipelayers RPL25

Information

2020 Rhino Equipment Pipelayers RPL25

Rhino® pipelayers are engineered to provide excellent efficiency in the most demanding working conditions.

Rhino® Pipe Layers are ideal for storm or sanitation sewers, drains, and water mains. Perform any combination of the following tasks: grade trenches or culverts, position pipe, or seal joints.

Features may include:

  • Rhino® Pipe Layers are ideal for storm or sanitation sewers, drains, and water mains. Perform any combination of the following tasks: grade trenches or culverts, position pipe, or seal joints.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Boom and hook draw works are driven by independent hydraulic winches.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Pipelayers RPL25
  • Model: WD10G178E25
  • Powershift, planetary gear and multiple disc clutch, hydraulically actuated; tracks are moved by a central spiral-bevel gear to provide instant power; gear selection lever with linkage mechanism; engine speed lever and decelerator pedal to control ground speed | System Pressure: 4 Mpa (580 psi)
  • Available
  • Over Track: 2,610 mm (8.6 ft)
  • Top of Cab: 3,014 mm (9.9 ft) | Top Exhaust Stack: 2,970 mm (9.7 ft) | Max. Lifting: 4,400 mm (14.4 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Pipelayers
  • RPL25
  • General
  • Model: WD10G178E25
  • Rhino®
  • Tier2
  • 6
  • 9.7 L (592 cu in)
  • Net Power 120 kW (161 Hp) @ 1,850 rpm
  • Net Peak Torque 830 Nm (612 lb-ft) @ 1,200 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, planetary gear and multiple disc clutch, hydraulically actuated; tracks are moved by a central spiral-bevel gear to provide instant power; gear selection lever with linkage mechanism; engine speed lever and decelerator pedal to control ground speed | System Pressure: 4 Mpa (580 psi)
  • Individual levers to control each track to provide precision steering; Steering clutch provides immediate response to the operator
  • Double reduction final drives mounted enclosed and isolated to protect them from shocks and debris
  • Dynamic braking when decelerator pedal is actuated; brake pedal actuation, hydraulically activated drums on each track for instant stop and reliability
  • Manually activated
  • Hook: 12 m/min (39 ft/min)
  • Gear pump | Control: Lever control for winch and mast
  • 15 mpa (2,176 psi)
  • Max. Flow: 500 L/min (132 gpm)
  • Min. Boom Swing Amplitude: 1.2 m (3.9 ft) | Max. Boom Swing Amplitude: 5.7 m (18.7 ft)
  • Standard Boom: 5,700 mm (18.7 ft)
  • Top of Cab: 3,014 mm (9.9 ft) | Top Exhaust Stack: 2,970 mm (9.7 ft) | Max. Lifting: 4,400 mm (14.4 ft)
  • 4,135 mm (13.6 ft)
  • Over Track: 2,610 mm (8.6 ft)
  • 3,050 mm (10.0 ft)
  • Tread Depth with Single-Bar Grouser: 50 mm (2.0 ft)
  • Dirt: 400 mm (15.7 in)
  • Minimum: 2,950 mm (9.7 ft)
  • Max. Lifting: 25,000 kg (55,116 lb)
  • 270(71)
  • 22(6)
  • 17(4)
  • 75(20)
  • Tank: 60(16)
  • Final Drive Case (for both): 45(12)
  • Operating: 22,000 kg (48,502 lb)