2020 Rhino Equipment Pipelayers RPL45

Information

2020 Rhino Equipment Pipelayers RPL45

Rhino® pipelayers are engineered to provide excellent efficiency in the most demanding working conditions.

Rhino® Pipe Layers are ideal for storm or sanitation sewers, drains, and water mains. Perform any combination of the following tasks: grade trenches or culverts, position pipe, or seal joints.

Features may include:

  • Rhino® Pipe Layers are ideal for storm or sanitation sewers, drains, and water mains. Perform any combination of the following tasks: grade trenches or culverts, position pipe, or seal joints.
  • Standard high-back seat and lower cushion adjust multiple ways for daylong comfort and support.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • Boom and hook draw works are driven by independent hydraulic winches.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Pipelayers RPL45
  • Cummins | Rhino®
  • Powershift, planetary gear and multiple disc clutch, hydraulically actuated; tracks are moved by a central spiral-bevel gear to provide instant power; gear selection lever with linkage mechanism; engine speed lever and decelerator pedal to control ground speed | System Pressure: 4 mpa (580 psi)
  • Available
  • Over Track: 2,860 mm (9.4 ft)
  • Top of Cab: 3,360 mm (11.0 ft) | Top Exhaust Stack: 3,120 mm (10.2 ft) | Max. Lifting: 5,250 mm (17.2 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Pipelayers
  • RPL45
  • General
  • Cummins | Rhino®
  • Model: NT855
  • Tier2
  • 6
  • 14 L (854 cu in)
  • Net Power 169 kW (227 Hp) @ 2,000 rpm
  • Net Peak 1,030 Nm (760 lb-ft) @ 1,400 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Powershift, planetary gear and multiple disc clutch, hydraulically actuated; tracks are moved by a central spiral-bevel gear to provide instant power; gear selection lever with linkage mechanism; engine speed lever and decelerator pedal to control ground speed | System Pressure: 4 mpa (580 psi)
  • Individual levers to control each track to provide precision steering; Steering clutch provides immediate response to the operator
  • Double reduction final drives mounted enclosed and isolated to protect them from shocks and debris
  • Dynamic braking when decelerator pedal is actuated; brake pedal actuation, hydraulically activated drums on each track for instant stop and reliability
  • Manually activated
  • Hook: 6.0 m/min (20 ft/min)
  • Gear pump | Control: Lever control for winch and mast
  • 20 mpa (2,901 psi)
  • Max. Flow: 450 L/min (119 gpm)
  • Min. Boom Swing Amplitude, Standard Boom: 1.2 m (3.9 ft) | Max. Boom Swing Amplitude, Standard Boom: 6.7 m (21.8 ft) | Ground Clearance in Dirt: 400 mm (15.7 in)
  • Standard Boom: 6,500 mm (21.3 ft)
  • Top of Cab: 3,360 mm (11.0 ft) | Top Exhaust Stack: 3,120 mm (10.2 ft) | Max. Lifting: 5,250 mm (17.2 ft)
  • 4,750 mm (15.6 ft)
  • Over Track: 2,860 mm (9.4 ft)
  • 3,700 mm (12.1 ft)
  • Tread Depth with Single-Bar Grouser: 60 mm (2.4 ft)
  • Minimum: 3,200 mm (10.5 ft)
  • Max Lifting: 45,000 kg (99,208 lb)
  • 350(92)
  • 40(11)
  • Engine: 22(6)
  • 90(24)
  • Tank: 100(26)
  • Final Drive Case (for both): 60(16)
  • Operating: 34,000 kg (74,957 lb)