2020 Rhino Equipment Skid Steers RS50-S

Information

2020 Rhino Equipment Skid Steers RS50-S

The RS series delivers best-in-class stability, visibility, and serviceability. Lightweight and agile, yet surprisingly powerful, this highly capable compact is the perfect size for confined areas. Easy to transport between jobsites, too.

Impressive tipping load and rated operating capacities let you master a variety of material-handling tasks.

Boom keeps the load close to the machine, close to the ground for carrying heavy loads, combined with their low center of gravity and generous ground clearance, these skid steers are productively agile.

Features may include:

  • The Rhino® Skid Steer Loaders are designed, built, and backed to deliver exceptional performance, versatility, ease of operation, serviceability, and customer support.
  • The cab provides a cleaner and quieter operating environment with excellent work tool visibility.
  • The Rhino® engine provides cleaner, quieter operation while delivering superior performance and durability. Engine and system distribution in the machine provides excellent space for access and maintenance.
  • Pin style forks are available in various tine lengths for moving loads on construction sites, handling bagged fertilizer and seed at landscaping and nursery sites.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Skid Steers RS50-S
  • Model: A498BPG
  • Available
  • Over Tires: 1,720 mm (5.6 ft) | Standard Bucket: 1,800 mm (5.9 ft)
  • Top of Cab: 2,090 mm (6.9 ft) | Hinge Pin: 3,970 mm (13.0 ft) | Dump with Standard Bucket: 2,100 mm (6.9 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Skid Steers
  • RS50-S
  • General
  • Model: A498BPG
  • Tier 2
  • Rhino®
  • 3.2 L (195 cu in)
  • Net Power 45 kW (60 hp) @ 2,500 rpm
  • Peak Torque 193 Nm (142 ft-lb) @ 1,800 rpm | Net Torque Rise: 13%
  • 2,500 rpm
  • Naturally aspirated
  • Dual-stage dry type with evacuator valve on filter housing for service
  • Lifting Cylinder: 80 mm (3.1 in) | Bucket Cylinder: 80 mm (3.1 in)
  • Lifting Cylinder: 680 mm (26.8 in) | Bucket Cylinder: 525 mm (20.7 in)
  • Hydrostatic radial piston motors, continuous loop chain | Axles: Heat-treated hardened steel, one-piece forged axle shafts with oil-bath lubrication
  • High-strength, adjustment-free chain pair in each tandem
  • Dynamic braking from hydrostatic motors
  • Size: 10-16.5 10ply
  • Size: 10-16.5 10ply
  • 450 CCA
  • Voltage: 12
  • 50 Amps
  • Max. Travel Speeds with 10-16.5 Tires forward Single: 11 km/h (7 mph) | Max. Travel Speeds with 10-16.5 Tires forward Single: 11 km/h (7 mph)
  • Max. Flow Rate: 64 L/min (17 gpm) | Horsepower: 17 kW (23 Hp)
  • 16 Mpa (2,321 psi)
  • 2 front, 1 rear
  • Lifting Cylinder, Diameter: 35 mm (1.4 in) | Bucket Cylinder, Diameter: 35 mm (1.4 in) | Dump Reach with Standard Bucket: 750 mm (2.5 ft) | Angle of Departure: 20 degrees | Bucket Rollback at Ground Level: 31 degrees
  • Without Bucket: 2,700 mm (8.9 ft) | With Standard Bucket: 3,525 mm (11.6 ft)
  • Over Tires: 1,720 mm (5.6 ft) | Standard Bucket: 1,800 mm (5.9 ft)
  • Top of Cab: 2,090 mm (6.9 ft) | Hinge Pin: 3,970 mm (13.0 ft) | Dump with Standard Bucket: 2,100 mm (6.9 ft)
  • 991 mm (3.3 ft)
  • 210 mm (8.3 in)
  • Front, with Standard Bucket: 2,090 mm (6.9 ft)
  • Dump Angle (full lift height): 45 degrees
  • 10 L (3 gal)
  • Engine: 7 L (2 gal) | Chain (each): 13 L (3 gal)
  • 60 L (16 gal)
  • System: 60 L (16 gal)
  • With Full Fuel Tank, 79 kg (175 lb) Operator, and Standard Equipment: 3,100 kg (6,834 lb)