2020 Rhino Equipment Trackloaders RTL24

Information

2020 Rhino Equipment Trackloaders RTL24

Designed to be productive, this machine will give you complete satisfaction in a wide range of tough applications in the most efficient and productive way. Its design also delivers strength and durability with excellent control and unmatched ease of operation.

Offers better fuel efficiency and reduced wear. It works at the point of combustion to optimize engine performance and provide low exhaust emissions.

Specific arrangements are available to extend machine capability to work under severe environmental conditions such as sanitary landfill, recycling site, demolition site, steel mill or soft ground conditions.

Features may include:

  • The RTL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control for excellent material handling. RTL Series hydraulic low effort controls allow for quick cycle times in order to increase productivity.
  • Large, spacious cab and low-effort and ergonomic controls provide the operator a convenient and comfortable working area.
  • Easy-to-read, high-visibility gauges and warning lamps keep the operator aware of critical system information.
  • The Rhino track loaders is available with several shoes options to best match to the job conditions. Any details count, and a single track shoe can make the difference.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Trackloaders RTL24
  • Cummins Model: NT855
  • Type: Powershift, planetary gear and multiple disc clutch
  • Available
  • Grouser: 560 mm (22.0 in) | Bucket: 2,685 mm (8.8 ft)
  • Top of Cab: 3,402 mm (11.2 ft) | Dumping at 45 deg: 2,840 mm (9.3 ft) | Max. Operating: 5,370 mm (17.6 ft) | Max. to Hinge Pin: 3,830 mm (12.6 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Trackloaders
  • RTL24
  • Shiphold/Port Handling
  • Cummins Model: NT855
  • Cummins | Rhino®
  • Tier 2
  • 6
  • 14 L (854 cu. In)
  • Net Power 164 kW (220 Hp) @ 2,000 rpm
  • Net Peak Torque 950 Nm (701 lb-ft) @ 1,400 rpm
  • Turbocharged, charge air cooled
  • Under-hood, dual element dry type, restriction indicator on filter housing for service
  • Direct Injection
  • Type: Powershift, planetary gear and multiple disc clutch
  • Individual levers to control each track
  • Double reduction final drives mounted enclosed and isolated
  • 24 Volts
  • Rating: 50A
  • Dynamic braking when decelerator pedal is actuated
  • Manually activated
  • Maximum Travel Speeds 1st Gear Forward: 3.5 km/h (2.2 mph) | Maximum Travel Speeds 1st Gear Reverse: 4.4 km/h (2.7 mph) | Maximum Travel Speeds 2nd Gear Forward: 6.5 km/h (4.0 mph) | Maximum Travel Speeds 2nd Gear Reverse: 7.5 km/h (4.7 mph) | Maximum Travel Speeds 3nd Gear Forward: 9.7 km/h (6.0 mph) | Maximum Travel Speeds 3nd Gear Reverse: 13.2 km/h (8.2 mph) | At 2.0 km/h (1.2 mph): 170(38,218) | At 6.0 km/h (3.7 mph): 50(11,240)
  • Drawbar Pull Maximum: 270 kN (60,698 lb) | Operator Station: ROPS and FOPS
  • 0.07 Mpa (10.2 psi)
  • System: 2 Mpa (290 psi) | 14 Mpa (2,031 psi)
  • Gear pump
  • Max. Flow L/min (gpm): 262 (69)
  • 2 Front lights, 2 Rear lights
  • Ground Contact Area: 35,504 cm2 (5,503 sq.in) | Reach at 45 deg.: 1,315 mm (4.3 ft)
  • Track: 1,880 mm (74.0 in)
  • Grouser: 560 mm (22.0 in) | Bucket: 2,685 mm (8.8 ft)
  • Track on Ground: 3,168 mm (124.7 in)
  • Top of Exhaust: 3,440 mm (11.3 ft)
  • Top of Cab: 3,402 mm (11.2 ft) | Dumping at 45 deg: 2,840 mm (9.3 ft) | Max. Operating: 5,370 mm (17.6 ft) | Max. to Hinge Pin: 3,830 mm (12.6 ft)
  • Tread Depth with Single-Bar Grouser: 60 mm (2.4 in) | Max. Digging Depth: 135 mm (5.3 in)
  • Dirt: 404 mm (15.9 in)
  • 7,050 mm (23.1 in)
  • Tank: 450 L (119 gal)
  • 118 L (31 gal)
  • Engine: 20 L (5 gal)
  • 150 L (40 gal)
  • Tank: 100 L (26 gal)
  • Fan drive: Belt driven | Shoes, Each Side: 38 | Track Rollers, Each Side: 6
  • Bucket: 2.3 m3 (3.0 cu. Yd)
  • Base: 23,340 kg(51,456 lb) | With 3-Shank Ripper: 27,240 kg(60,054 lb)
  • Sealed and lubricated
  • 216 mm (8.5 in)