2020 Rhino Equipment Wheel Excavators REX210W

Information

2020 Rhino Equipment Wheel Excavators REX210W

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Wheel Excavators REX210W
  • Model: 6BT5.9-C
  • Available
  • Upperstructure: 2,700(8.9) | Over Tires (10.00-20): 2,380 mm (7.8 ft) | Stabilizers on Ground: 3,200 mm (10.5 ft)
  • Cutting: 8,555 mm (28.1 ft) | Max. Dumping: 5,683 mm (18.6 ft) | Cab: 3,140 mm (10.3 in) | Blade: 580 mm (22.8 in)

Specifications

  • 2020
  • Rhino Equipment
  • Wheel Excavators
  • REX210W
  • Wheel
  • Model: 6BT5.9-C
  • Cummins
  • Tier2
  • 6
  • 5.9 L (360 cu in)
  • Net Power 112 kW (150 Hp) @ 1950 rpm
  • Turbocharged, air-to-air charge air cooler
  • Boom(2): 120 mm (4.7 in) | Arm(1): 135 mm (5.3 in) | Bucket(1): 115 mm (4.5 in)
  • Boom(2): 1,285 mm (50.6 in) | Arm(1): 1,175 mm (46.3 in) | Bucket(1): 1,120 mm (44.1 in)
  • Direct Injection
  • Dual speed mode for tracks on-dash one-button activation
  • 10.00-20
  • 10.00-20
  • Maximum Travel Low: 8(5) | Maximum Travel High: 35(22) | Swing Mechanism: 11.7 rpm
  • Swing Mechanism Torque: 67,100 Nm (49,490 lb-ft) | Arm Digging Force: 100 kN (22,481 lb) | Bucket Digging Force: 114 kN (25,628 lb)
  • Open center, load sensing; two variable-displacement axial-piston pumps | Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons
  • 31 Mpa (4,554 psi) | Power Boost: 34 Mpa (4,975 psi)
  • Max. Flow: 226 L/min (60 gpm)
  • Boom(2) Rod Diameter: 85 mm (3.3 in) | Arm(1) Rod Diameter: 95 mm (3.7 in) | Bucket(1) Rod Diameter: 80 mm (3.1 in) | Oscillation Angle for Front Axle: 7.5 degrees | Max. Reach: 9,773 mm (32.1 ft) | Max. Reach at Ground Level: 9,593 mm (31.5 ft) | Min. Swing Radius: 3,974 mm (13.0 ft) | Max. Vertical Wall: 5,315 mm (17.4 ft) | Swing Radius: 2,809 mm (9.2 ft) | Counterweight Clearance: 1,230 mm (4.0 ft) | Max. Blade Lower: 190 mm (7.5 ft) | Max. Blade Rise: 450 mm (17.7 in)
  • Arm: 3,050 mm (10 ft)
  • Digging: 6,330 mm (20.8 ft) | Digging Depth at 2,440 mm (8 ft) Falt Bottom: 6,035 mm (19.8 ft)
  • Cutting: 8,555 mm (28.1 ft) | Max. Dumping: 5,683 mm (18.6 ft) | Cab: 3,140 mm (10.3 in) | Blade: 580 mm (22.8 in)
  • With 3,050 mm (10 ft) Arm: 9,739 mm (32.0 ft)
  • With 3,050 mm (10ft) Arm: 3,235 mm (10.6 ft)
  • 2,630 mm (8.66 ft)
  • Upperstructure: 2,700(8.9) | Over Tires (10.00-20): 2,380 mm (7.8 ft) | Stabilizers on Ground: 3,200 mm (10.5 ft)
  • Pull: 11,200 kg (24,692 lb)
  • 340 L (90 gal)
  • 30 L (8 gal)
  • Engine: 21.5 L (6 gal)
  • Hydraulic System: 266 L (70 gal) | Hydraulic Tank: 246 L (65 gal)
  • Fan Drive: Belt driven
  • Lift Over End at 15' Radius, Ground Level: 10,600 kg (23,369 lb) | Lift Over End at 20' Radius, Ground Level: 7,323 kg (16,144 lb) | Lift Over End at 25' Radius, Ground Level: 5,368 kg (11,834 lb) | Lift Over Side at 15' Radius, Ground Level: 6,653 kg (14,667 lb) | Lift Over Side at 20' Radius, Ground Level: 4,526 kg (9,978 lb) | Lift Over Side at 25' Radius, Ground Level: 3,486 kg (7,685 lb)
  • Monoblock Boom, Rear Dozer, Front Outriggers: 19,650 kg (43,321 lb) | Monoblock Boom, Rear and Front Outriggers: 19,900 kg (43,872 lb) | Undercarriage 10.00-20 Tires: 6,822 kg (15,040 lb) | Monoblock Boom: 1,679 kg (3,702 lb) | Arm with Bucket Cylinder and Linkage 3,050 mm (10 ft): 705 kg (1,554 lb) | Boom Lift Cylinders (2), Total: 428 kg (944 lb) | 1.0 m3 (1.3 cu. Yd) Bucket : 688 kg (1,517 lb) | Counterweight, Standard: 4,450 kg (9,811 lb)
  • Max Operating: 20,600 kg (45,415 lb)