2020 Rhino Equipment Wheel Excavators REX60W

Information

2020 Rhino Equipment Wheel Excavators REX60W

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Wheel Excavators REX60W
  • Model: A498BPG
  • Available
  • Max. Cutting: 5,370 mm (17.6 ft) | Max. Dumping: 3,810 mm (12.5 ft) | Cab: 1,645 mm (5.4 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Wheel Excavators
  • REX60W
  • Wheel
  • Model: A498BPG
  • Rhino®
  • Tier3
  • 4
  • 3.2 L (195 cu in)
  • Net Power 45 kW (60 Hp) @ Rated 2,500 rpm
  • Naturally Aspirated
  • Blade Cylinder(1): 75 mm (3.0 in) | Stabilizers(2): 80 mm (3.1 in) | Boom(2): 115 mm (4.5 in) | Arm(1): 95 mm (3.7 in) | Bucket(1): 85 mm (3.3 in)
  • Blade Cylinder(1): 345 mm (13.6 in) | Stabilizers(2): 645 mm (25.4 in) | Boom(2): 885 mm (34.8 in) | Arm(1): 900 mm (35.4 in) | Bucket(1): 730 mm (28.7 in)
  • Direct Injection
  • Dual speed mode for wheels on-dash one-button activation
  • 6 Tires, 12-16.5
  • Number: 2
  • Voltage: 24V
  • Rating: 70A
  • Maximum Travel Low: 6(4) | Maximum Travel High: 25(16) | Swing Mechanism: 13 rpm
  • Arm Digging Force: 42 kN (9,442 lb) | Bucket Digging Force: 58 kN (13,039 lb)
  • Open center, load sensing; two constant displacement gear pumps
  • 18 Mpa (2,611 psi)
  • Max. Flow: 48 L/min (13 gpm)
  • Control: 2 Pilot levers, low-effort hydraulic controls with horn
  • Working lights, turn signals, brake lights
  • Blade Cylinder(1) Rod Diameter: 50 mm (2.0 in) | Stabilizers(2) Rod Diameter: 50 mm (2.0 in) | Boom(2) Rod Diameter: 65 mm (2.6 in) | Arm(1) Rod Diameter: 60 mm (2.4 in) | Bucket(1), Rod Diameter: 55 mm (2.2 in) | Max. Reach: 5,975 mm (19.6 in) | Max. Reach at Ground Level: 5,776 mm (19.0 in) | Max. Vertical Wall: 2,250 mm (7.4 in) | Wheel Tread: 2,035 mm (6.7 ft)
  • Arm: 1,890 mm (6.2 ft)
  • Digging: 2,857 mm (9.4 ft) | Digging Depth at 1,890 mm (6 ft) Flat Bottom: 2,745 mm (9.0 ft)
  • Max. Cutting: 5,370 mm (17.6 ft) | Max. Dumping: 3,810 mm (12.5 ft) | Cab: 1,645 mm (5.4 ft)
  • Transport: 5,598 mm (18.4 ft)
  • With 1,890 mm (6.2ft) Arm: 2,905 mm (9.5 ft)
  • With 12-16.5 Tires: 2,035 mm (6.7 ft)
  • 290 mm (1.0 ft)
  • 2,345 mm (7.7 ft)
  • 100 (26)
  • 13(3)
  • Engine: 18(5)
  • Tank: 100(26) | Swing Drive: 8(2)
  • Lifting Capacity at Ground Level, 15' Reach: 4,295 kg (9,469 lb)
  • Fan Drive: Belt driven