Current Rhino Equipment Equipment Wheel Excavators

2020 Rhino Equipment Wheel Excavators REX74CW

2020 Rhino Equipment Wheel Excavators REX74CW

Swipe to View More

  • Year 2020
  • Make Rhino Equipment
  • Model Wheel Excavators
  • Engine Model: A498BPG
Shop Rhino Equipment Pre-Owned
Product Details Specifications Photos
2020 Rhino Equipment Wheel Excavators REX74CW

2020 Rhino Equipment Wheel Excavators REX74CW

  • Year 2020
  • Manufacturer Rhino Equipment
  • Model Name Wheel Excavators
  • Trim Name REX74CW
  • Generic Type (Primary) Wheel
  • Engine Manufacturer Rhino®
  • Engine Model: A498BPG
  • Emissions Tier 2
  • Cylinder Liners 4
  • Displacement 3.2 L (195 cu. In)
  • Engine Power Net Power 45 kW (60 Hp) @2,500 rpm
  • Aspiration Naturally Aspirated
  • Bore Boom(1): 110 mm (4.3 in) | Arm(1): 90 mm (3.5 in) | Bucket(1): 80 mm (3.1 in)
  • Stroke Boom(1): 850 mm (33.5 in) | Arm(1): 975 mm (38.4 in) | Bucket(1): 695 mm (27.4 in)

2020 Rhino Equipment Wheel Excavators REX74CW

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Engine

Engine Manufacturer Rhino®
Engine Model: A498BPG
Emissions Tier 2
Cylinder Liners 4
Displacement 3.2 L (195 cu. In)
Engine Power Net Power 45 kW (60 Hp) @2,500 rpm
Aspiration Naturally Aspirated
Bore Boom(1): 110 mm (4.3 in) | Arm(1): 90 mm (3.5 in) | Bucket(1): 80 mm (3.1 in)
Stroke Boom(1): 850 mm (33.5 in) | Arm(1): 975 mm (38.4 in) | Bucket(1): 695 mm (27.4 in)

Fuel System

Fuel System Direct Injection

Drivetrain

Drivetrain Crawler Mode: Dual speed mode for tracks on-dash one-button activation | Wheel Mode: Two-wheel-drive; Front tire steering; Full hydraulic control

Battery

Battery Number: 2

Electric

Electrical Voltage: 24 Volts
Alternator Rating: 70 A

Operational

Operating Speed Maximum Travel (Track mode) Low: 2.7 (1.7) | Maximum Travel (Track mode) High: 5.1 (3.2) | Maximum Travel (Track mode) Wheel Mode: 10 (6.2)
Operating Conditions Arm Digging Force: 33 kN (7,419 lb) | Bucket Digging Force: 53 kN (11,847 lb)

Hydraulics

Hydraulic Pump Open center, load sensing; two variable-displacement axial-piston pumps
Maximum Pressure 18 mpa (2,611 psi) | Power Boost: 29 mpa (4,206 psi)
Hydraulic Flow Max. Flow: 48 L/min (13 gpm)
Hydraulic Type Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons

Lights and Safety

Lighting Lights: 3 Front lights, 1 Rear lights turn signals, brake lights

Dimensions

Dimensions Boom(1) Rod Diameter: 60 mm (2.4 in) | Arm(1) Rod Diameter: 55 mm (2.2 in) | Bucket(1) Rod Diameter: 50 mm (2.0 in) | Max. Reach: 5,975 mm (19.6 ft) | Max. Reach at Ground Level: 5,780 mm (19.0 ft) | Tail Swing Radius: 1,788 mm (5.9 ft) | Swing Radius: 1,788 mm (5.9 ft) | Counterweight Clearance: 650 mm (2.1 ft) | Wheel Tread: 1,930 mm (6.3 ft)
Track Width 500 mm (19.7 in)
Length Arm: 2,000 mm (6.6 ft) | Track on Ground: 2,950 mm (9.7 ft) | Undercarriage: 3,100 mm (10.2 ft)
Depth, Maximum Digging: 2,990 mm (9.8 ft) | Digging Depth at 2,000 mm (6,6 ft) Flat Bottom: 2,890 mm (9.5 ft)
Height Max. Cutting: 5,400 mm (17.7 ft) | Max. Dumping: 3,900 mm (12.8 ft) | Cab: 1,645 mm (5.4 ft)
Overall Length Transport: 6,100 mm (20.0 ft)
Overall Height With 2,000 mm (6.6ft) Arm: 2,905 mm (9.5 ft)
Width Upperstructure: 1,995 mm (6.5 ft) | Gauge: 1,900 mm (6.2 ft)
Overall Width With Triple Semi-Grouser 500 mm (20 in) Shoes: 2,085 mm (6.8 ft)

Capacities

Fuel Capacity 160(42)
Cooling System 12(3)
Oil capacity Engine: 8(2)
Hydraulic Capacity Tank: 160(42) | Swing Drive: 5(1)
Features Final Drive Case (each): 70(18)
Cargo Capacity Lift Over End at 15' Radius, Ground Level: 3,010 kg (6,636 lb) | Lift Over Side at 15' Radius, Ground Level: 1,925 kg (4,244 lb)

Features

Features Carrier Rollers (each side): 1 | Track Rollers (each side): 5 | Shoes (each side) Triple Semi-Grousers: 40 | Undercarriage Adjustment: Hydraulic | Undercarriage Guides: Front Idler
Chain Type Undercarriage: Sealed and lubricated

Product Photography