2020 Rhino Equipment Wheel Excavators REX74CW

Information

2020 Rhino Equipment Wheel Excavators REX74CW

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
  • Reliable and durable Diesel engine, more efficient with low maintenance costs.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Wheel Excavators REX74CW
  • Model: A498BPG
  • Available
  • Upperstructure: 1,995 mm (6.5 ft) | Gauge: 1,900 mm (6.2 ft)
  • Max. Cutting: 5,400 mm (17.7 ft) | Max. Dumping: 3,900 mm (12.8 ft) | Cab: 1,645 mm (5.4 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Wheel Excavators
  • REX74CW
  • Wheel
  • Model: A498BPG
  • Rhino®
  • Tier 2
  • 4
  • 3.2 L (195 cu. In)
  • Net Power 45 kW (60 Hp) @2,500 rpm
  • Naturally Aspirated
  • Boom(1): 110 mm (4.3 in) | Arm(1): 90 mm (3.5 in) | Bucket(1): 80 mm (3.1 in)
  • Boom(1): 850 mm (33.5 in) | Arm(1): 975 mm (38.4 in) | Bucket(1): 695 mm (27.4 in)
  • Direct Injection
  • Crawler Mode: Dual speed mode for tracks on-dash one-button activation | Wheel Mode: Two-wheel-drive; Front tire steering; Full hydraulic control
  • Number: 2
  • Voltage: 24 Volts
  • Rating: 70 A
  • Maximum Travel (Track mode) Low: 2.7 (1.7) | Maximum Travel (Track mode) High: 5.1 (3.2) | Maximum Travel (Track mode) Wheel Mode: 10 (6.2)
  • Arm Digging Force: 33 kN (7,419 lb) | Bucket Digging Force: 53 kN (11,847 lb)
  • Open center, load sensing; two variable-displacement axial-piston pumps
  • 18 mpa (2,611 psi) | Power Boost: 29 mpa (4,206 psi)
  • Max. Flow: 48 L/min (13 gpm)
  • Control: 2 pilot levers, low-effort hydraulic controls with horn and boost bottons
  • Lights: 3 Front lights, 1 Rear lights turn signals, brake lights
  • Boom(1) Rod Diameter: 60 mm (2.4 in) | Arm(1) Rod Diameter: 55 mm (2.2 in) | Bucket(1) Rod Diameter: 50 mm (2.0 in) | Max. Reach: 5,975 mm (19.6 ft) | Max. Reach at Ground Level: 5,780 mm (19.0 ft) | Tail Swing Radius: 1,788 mm (5.9 ft) | Swing Radius: 1,788 mm (5.9 ft) | Counterweight Clearance: 650 mm (2.1 ft) | Wheel Tread: 1,930 mm (6.3 ft)
  • 500 mm (19.7 in)
  • Arm: 2,000 mm (6.6 ft) | Track on Ground: 2,950 mm (9.7 ft) | Undercarriage: 3,100 mm (10.2 ft)
  • Digging: 2,990 mm (9.8 ft) | Digging Depth at 2,000 mm (6,6 ft) Flat Bottom: 2,890 mm (9.5 ft)
  • Max. Cutting: 5,400 mm (17.7 ft) | Max. Dumping: 3,900 mm (12.8 ft) | Cab: 1,645 mm (5.4 ft)
  • Transport: 6,100 mm (20.0 ft)
  • With 2,000 mm (6.6ft) Arm: 2,905 mm (9.5 ft)
  • Upperstructure: 1,995 mm (6.5 ft) | Gauge: 1,900 mm (6.2 ft)
  • With Triple Semi-Grouser 500 mm (20 in) Shoes: 2,085 mm (6.8 ft)
  • 160(42)
  • 12(3)
  • Engine: 8(2)
  • Tank: 160(42) | Swing Drive: 5(1)
  • Carrier Rollers (each side): 1 | Track Rollers (each side): 5 | Shoes (each side) Triple Semi-Grousers: 40 | Undercarriage Adjustment: Hydraulic | Undercarriage Guides: Front Idler
  • Lift Over End at 15' Radius, Ground Level: 3,010 kg (6,636 lb) | Lift Over Side at 15' Radius, Ground Level: 1,925 kg (4,244 lb)
  • Undercarriage: Sealed and lubricated