2020 Rhino Equipment Wheel Excavators REX75W
- Year 2020
- Make Rhino Equipment
- Model Wheel Excavators
- Engine Model: RE51360
2020 Rhino Equipment Wheel Excavators REX75W
2020 Rhino Equipment Wheel Excavators REX75W
The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.
Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.
Features may include:
- This Rhino® excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
- Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
- Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather.
- Reliable and durable Diesel engine, more efficient with low maintenance costs.
Engine
Engine Manufacturer
Rhino®
Engine
Model: RE51360
Emissions
Tier2
Cylinder Liners
4
Displacement
3.0 L (183 cu in)
Engine Power
Net Power 51 kW (60 Hp) @ 2,000 rpm
Aspiration
Naturally Aspirated
Bore
Blade Cylinder(1): 80 mm (3.1 in) | Stabilizers(2): 85 mm (3.3 in) | Boom(2): 115 mm (4.5 in) | Arm(1): 95 mm (3.7 in) | Bucket(1): 85 mm (3.3 in)
Stroke
Blade Cylinder(1): 350 mm (13.8 in) | Stabilizers(2): 650 mm (25.6 in) | Boom(2): 885 mm (34.8 in) | Arm(1): 900 mm (35.4 in) | Bucket(1): 730 mm (28.7 in)
Fuel System
Fuel System
Direct Injection
Drivetrain
Drivetrain
Dual speed mode for wheels on-dash one-button activation
Wheels & Tires
Tires, Front Specification
6 Tires, 14-17.5
Tires, Rear Specification
6 Tires, 14-17.5
Battery
Battery
Number: 2
Electric
Electrical
Voltage: 24V
Alternator
Rating: 70A
Operational
Operating Speed
Maximum Travel Low: 8(5) | Maximum Travel High: 30(19) | Swing Mechanism: 13 rpm
Operating Conditions
Arm Digging Force: 45 kN (10,116 lb) | Bucket Digging Force: 60 kN (13,489 lb)
Hydraulics
Hydraulic Pump
Open center, load sensing; two constant displacement gear pumps
Maximum Pressure
18 Mpa (2,611 psi)
Hydraulic Flow
Max. Flow: 150 L/min (40 gpm)
Hydraulic Type
Control: 2 Pilot levers, low-effort hydraulic controls with horn
Lights and Safety
Lighting
Lights: Working lights, turn signals, brake lights
Dimensions
Dimensions
Blade Cylinder(1) Rod Diameter: 55 mm (2.2 in) | Stabilizers(2) Rod Diameter: 55 mm (2.2 in) | Boom(2) Rod Diameter: 65 mm (2.6 in) | Arm(1) Rod Diameter: 60 mm (2.4 in) | Bucket(1) Rod Diameter: 55 mm (2.2 in) | Max. Reach: 5,800 mm (19.0 in) | Max. Reach at Ground Level: 5,670 mm (18.6 in) | Max. Vertical Wall: 3,505 mm (11.5 in) | Wheel Tread: 1,650 mm (5.4 ft)
Length
Arm: 2,100 mm (6.9 ft)
Depth, Maximum
Digging: 3,450 mm (11.3 ft) | Digging Depth at 1,890 mm (6 ft) Flat Bottom: 3,345 mm (11.0 ft)
Height
Max. Cutting: 6,200 mm (20.3 ft) | Max. Dumping: 3,000 mm (9.8 ft) | Cab: 1,650 mm (5.4 ft)
Overall Length
Transport: 6,500 mm (21.3 ft)
Overall Height
With 2,100 mm (6.9 ft) Arm: 3,000 mm (9.8 ft)
Ground Clearance
2WD: 315 mm (1.0 ft) | 4WD: 300 mm (1.0 ft)
Overall Width
With 14-17.5 Tires: 2,200 mm (7.2 ft)
Wheelbase
2,265 mm (7.4 ft)
Capacities
Fuel Capacity
130(34)
Cooling System
17(4)
Oil capacity
Engine: 21(6)
Hydraulic Capacity
Tank: 100(26)
Features
Swing Drive: 8(2)
Cargo Capacity
Lifting Capacity at Ground Level, 15' Reach: 4,890 kg (10,781 lb)