2021 John Deere M20

MoreLess
Limited Time Offer!

Selling Price -$18,500.00

    • 21' M20 ROTARY CUTTER, BLADE BAR, 1000-PTO, STALK SHREDDING ATTACHMENT, LIMITED BASIC WARRANTY TILL 31-DEC-25'
    Type:20 Ft
  • Type:Wing-Fold
  • 2021
  • John Deere
  • M20
  • Base
  • General
  • Transfer Continuous: 250 hp (186 kW) / Peak: 300 hp (224 kW) / Center Continuous: 100 hp (75 kW) / Peak: 216 hp (161 kW) / Outer Continuous: 100 hp (75 kW) Peak: 216 hp (161 kW)
  • Main: CV ASAE Category 5, splined telescoping profiles / Connecting: ASAE Category 5, splined telescoping profiles
  • Spring
  • 75 hp (56 kW) | Tractor: 540 or 1,000 rpm
  • Blade tip: 540 RPM (81.7 m/s 268.1 fps) / 1000 RPM (83 m/s 272.4 fps)
  • Standard self-level hitch clevis with 22.5-in. (57.2-cm) narrow-profile width / Ball-type self-level hitch with 22.5-in. (57.2-cm) narrow-profile width and 2-degree rotation freedom to each side | Jackstand: Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
  • 10 gauge - (3.4 mm 0.135 in.) | Shirt: 3 gauge - (6 mm 0.24 in.)
  • Cutting Capacity: 3 in. (76.2 mm) | Blades Thickness: 0.5 in (13 mm) | Blade Overlap: 6 in. (152 mm) | Wing flex: For transport: upward 90 degree (angle) / Working angles: upward 45 degree (angle) / Downward 22 degree (angle)
  • 20 ft (6.1 m)
  • Cutting: 1-16 in. (25.4-406.4 mm)
  • Cutting chamber: 10 in. (254 mm)
  • 11.1 ft (3.4 m) at wing wheels
  • 20.3 ft (6.2 m)
  • 17.3 ft (5.3 m)
  • Greaseable single 1-in. (2.5-cm) diameter full-length hinge pin
  • Blade: 4 in. (102 mm)
  • 6520 lb (2957 kg)
  • Connecting: No-seize, slip-clutch driveline | Shielding Front: Single-row chain guard / Rear: Single-row chain guard
  • Deck shape: Easy-clean dome-shaped top deck | Deck type: Single dome deck | Number of Gearcases: 4 | Blade Type: Suction | Blade holder Type: Round stump jumper for maximum protection for blade carrier against obstruction damage | Wing lift: Simultaneous; includes spring assist unfolding
  • Hinges: Intermittent cast steel segments
  • Wing-leveling: Easy adjust turnbuckle with bearing
  • Gearboxes: Five years
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $18,500.00
  • Ag and Turf
  • Pre-Owned
  • B702855
  • 2021
  • John Deere
  • M20
  • 1P00M20FLLE000948
  • Available
  • Blade: 4 in. (102 mm)
  • Cutting: 1-16 in. (25.4-406.4 mm)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.