2018 John Deere 244L Base
- Year 2018
- Make John Deere
- Model 244L
2018 John Deere 244L
Wheel Loader- Net Power: 52kW (71 hp)
- Operating Weight: 5560 kg (12,258 lb.)
- Bucket Capacity: 0.8m3 (1.0 cu. yd.)
Features may include:
Engine- An EPA Final Tier 4 (FT4)/EU Stage V emission-certified four-cylinder diesel engine helps this compact loader deliver power without compromise.
- Articulation Plus™ Steering System combines 30 degrees of articulation with an additional 10 degrees of rear-wheel steering.
- New design improves the lifting path to near parallel – for better load-carrying capability than previous compact loader models.
- With a standard speed of up to 23 mph, the 244L Compact Wheel Loader can make some pretty quick moves on and between jobsites.
- Every John Deere machine comes with a level of comfort through our full machine standard warranty. It promises we’ll fix any defects in materials or worksmanship on our compact equipment for two years after delivery or 2,000 hours.
Engine
Model Id
4TNV98CT
Engine Manufacturer
Yanmar
Rated Engine Speed
2400 rpm
Engine Torque
280 Nm (206 lbf / ft)
Displacement
3.3 ltr (203 In³)
Emissions
Rating: Tier 4
PTO
PTO Power, Rated Engine Speed
52 kW (71 hp)
Drivetrain
Transmission
Hydrostatic
Differential, Front
Locking
Differential, Rear
Open
Brakes
Brake System Type
Service: Wet Disc & Drum | Location: All Wheels | Actuation: Hydraulic
Parking Brake
Wet Disc
Wheels & Tires
Tires, Rear Specification
365 / 70 R18
Electric
Electrical
System Voltage: 12 V
Alternator Output, Maximum
80 Amp
Operational
Operating Conditions
Breakout - Bucket: 4895 kgf (10792 lbf)
Hydraulics
Pump Type
Gear
Hydraulic Flow
Pump: 70 lt/min (18 gallons (US) / min)
Maximum Pressure
System: 230 bar (3335 PSI)
Dimensions
Height
Over Cab: 2750 mm (9 ft ) | Pivot Pin: 3220 mm (10 ft 7 in)
Wheelbase
2150 (7 ft 1 in)
Length
Including Bucket: 5410 mm (17 ft 9 in)
Ground Clearance
285 mm (11 inches)
Width
Over tires: 1920 mm (6 ft 4 in)
Discharge Distance
Reach - At 2130mm 45° Dump: 1520 mm (5 ft )
Dimensions
Turning Circle - Maximum: 7940 mm (26 ft 1 in)
Capacities
Fuel Capacity
90 ltr (23.8 gallons (US))
Hydraulic Capacity
Tank: 66 ltr (17.4 gallons (US))
Axle Capacity, Front
5.2 ltr (1.375 gallons (US))
Axle Capacity, Rear
4.7 ltr (1.25 gallons (US))
Transmission Fluid Volume
1.7 ltr (0.45 gallons (US))
Heaped Capacity
0.8 m³ (1 yd³)
Volume
Bucket - Smallest: 0.8 m³ (1 yd³) | Largest bucket: 1.1 m³ (1.4 yd³)
Weights
Weight, In Running Order
5560 kg (12258 lbs)