2020 Rhino Equipment Excavators REX700

Information

2020 Rhino Equipment Excavators REX700

The Rhino® excavator is the solution to meet today´s requirements in high performance, maximum uptime, and low cost operation. Designed to keep you competitive, these excavators let you finish the job faster and put more profit in your pocket.

Industry leading fuel efficiency, ergonomic work environment, more comfortable for the operator. New cab design creates a safer work environment. Environmentally friendly – low emission levels, low noise, and more than 95% of the machine is recyclable.

Features may include:

  • This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A high-efficiency “on-demand” cooling system, advanced multifunction monitor, and productivity modes to allow you to choose your digging style headline the long list of advances.
  • Ergonomically correct short-throw pilot levers provide smooth, predictable fingertip control with less movement or effort.
  • With large idlers, rollers, and strutted links, the sealed and lubricated undercarriage delivers long and reliable performance.
  • Generous flow, and swing torque help speed cycles. So you can do your best to stay on schedule or ahead of the weather. Rhino® excavators come standard with the hydraulic line for attachments. Attachments include hydraulic hammers, thumb cutters, and many more.

Photos

Highlights

  • Albany, Georgia
  • 2020
  • Rhino Equipment
  • Excavators REX700
  • Cummins Model: QSX15
  • Available
  • Upperstructure: 4,015 mm (13.2 ft) | Gauge: 3,350 mm (11.0 ft)
  • Max. Cutting: 11,140 mm (36.5 ft) | Max. Dumping: 7,050 mm (23.1 ft) | Cab: 3,538 mm (11.6 ft)

Specifications

  • 2020
  • Rhino Equipment
  • Excavators
  • REX700
  • Medium
  • Cummins Model: QSX15
  • Cummins or Rhino®
  • Rating: Tier 4
  • 6
  • 11 L (671 cu. In)
  • Net Power 264 kw (354 hp)@ 1,950 rpm
  • Fuel System: Direct Injection
  • Turbocharged, air-to-air charge air cooler
  • Boom (2): 190 mm (7.5 in) | Arm (1): 210 mm (8.3 in) | Bucket (1): 190 mm (7.5 in)
  • Boom (2): 1,790 mm (70.5 in) | Arm (1): 2,110 mm (83.1 in) | Bucket (1): 1,440 mm (56.7 in)
  • 216,560 Nm (159,726 lb-ft)
  • Power Train: Dual speed mode for tracks on-dash one-button activation
  • Maximum Travel Speeds Low: 2 kph (1 mph) | Maximum Travel Speeds High: 4 kph (2 mph) | Swing Mechanism: 8.6 rpm
  • Triple Semi-Grouser (700mm) (28 in) Shoes: 89 Kpa (12.9 psi)
  • Arm Digging Force: 262 kN (58,900 lb) | Bucket Digging Force: 328 kN (73,737 lb)
  • System: Open center, load sensing; two variable-displacement axial-piston pumps
  • 35 Mpa (5,076 psi) | Power Boost Mpa (psi): 36(5,221)
  • Max. Flow L/min (gpm) (each): 430(114)
  • Max. Reach: 11,740 mm (38.5 ft) | Max. Reach at Ground Level: 11,440 mm (37.5 ft) | Max. Vertical Wall: 4,000 mm (13.1 ft) | Tail Swing Radius: 5,555 mm (18.2 ft) | Swing Radius: 3,530 mm (11.6 ft) | Rod Diameter Boom (2): 130 mm (5.1 in) | Rod Diameter Arm (1): 140 mm (5.5 in) | Rod Diameter Bucket (1): 130 mm (5.1 in)
  • 700 mm (27.6 ft)
  • Arm: 3,020 mm (9.9 ft) | Track on Ground: 4,720 mm (15.5 ft) | Undercarriage: 5,990 mm (19.7 ft)
  • Max. Digging Depth: 7,185 mm (23.6 ft) | Max. Digging Depth at 2,440 mm (8 ft) Falt Bottom: 6,800 mm (22.3 ft)
  • Max. Cutting: 11,140 mm (36.5 ft) | Max. Dumping: 7,050 mm (23.1 ft) | Cab: 3,538 mm (11.6 ft)
  • Overall Length with 3,020 mm (9.9 ft) Arm: 12,170 mm (39.9 ft)
  • Overall Height with 3,020 mm (9.9 ft) Arm: 4,780 mm (15.7 ft)
  • Counterweight Clearance: 2,500 mm (8.2 ft)
  • Upperstructure: 4,015 mm (13.2 ft) | Gauge: 3,350 mm (11.0 ft)
  • Triple Semi-Grouser 700 mm (28 in) Shoes: 4,000 mm (13.1 ft)
  • Fuel Tank: 900 L (238 gal)
  • 75 L (20 gal)
  • Engine: 50 L (13 gal)
  • Tank: 400 L (106 gal)
  • Control: Pilot levers, low-effort hydraulic controls with horn and boost bottons | Carrier Rollers (each side): 2 | Track Rollers (each side): 9 | Shoes (each side) Triple Semi-Grousers: 51
  • Base: 70,000 kg (154,324 lb) | Lift Over End at 20' Radius, Ground Level: 26,980 kg (59,481 lb) | Lift Over End at 25' Radius, Ground Level: 21,200 kg (46,738 lb) | Lift Over Side at 20' Radius, Ground Level: 22,980 kg (50,662 lb) | Lift Over Side at 25' Radius, Ground Level: : 16,300 kg (50,662 lb)
  • With full fuel tank; 79 kg (175lb) operator; 1.6 m3 (2.1 cu. Yd), general purpose bucket; 600 mm (27 in) shoes; and 3,185 mm (10 ft) arm
  • Adjustment: Hydraulic | Guides: Front Idler | Chain: Sealed and lubricated